Image Tools
Lithophane Maker (Image to STL)
Turn a photo into a 3D-printable lithophane: a flat or curved plate whose thickness follows the picture, so it appears when lit from behind. Set the size, thinnest and thickest points, frame and detail, see a backlit preview, and download a binary STL.
How to use
- 1Drop a photo. High-contrast pictures with a clear subject work best.
- 2Set the width, the thinnest and thickest points, a frame, flat or curved, and the detail, checking the backlit preview.
- 3Download the STL and slice it with 100% infill in white or natural filament.
Frequently asked questions
What thicknesses should I use?
The defaults (0.8 mm thinnest, 3 mm thickest) are a common starting point for white PLA with a 0.4 mm nozzle. A thinner minimum lets more light through the bright areas, but a very thin minimum can leave holes or fragile spots; a thicker maximum gives deeper shadows but needs a stronger light behind it. Print a small test first: filaments differ a lot in how much light they let through.
Which detail setting should I pick?
0.2 mm per point suits most prints with a 0.4 mm nozzle. 0.1 mm makes the STL four times larger without much visible gain on most printers. Coarser settings make smaller files that slice faster.
Flat or curved?
Flat plates suit frames and light boxes. A curved plate stands up by itself and is the usual choice for lamps and candle holders; the curve angle sets how far it bends (120° is a gentle arc, 300° almost a cylinder). The picture is on the outside of the curve.
Is the preview accurate?
It's an approximation: light through the plate is assumed to fall off at a fixed rate with thickness. Real prints depend on the filament, light colour and layer height, so the print usually looks somewhat different.
Is my photo uploaded?
No. The model is built in your browser.
How a lithophane works
Light shining through a thin plastic plate dims as the plate gets thicker. A lithophane uses that: dark parts of the photo become thick, bright parts thin, so with a light behind it the picture appears. The tool turns each point of the photo into a height between your thinnest and thickest values and closes the shape with a flat back and sides, so slicers see a solid, watertight model.
Example: a 100 mm portrait for a frame
Drop a well-lit portrait, keep 100 mm width, 0.8–3 mm, a 3 mm frame and 0.2 mm detail. The statistics show the final size, triangle count and STL size before you download. Print it upright (rotate 90° in your slicer) at 0.12 mm layers with 100% infill, and place it in front of a white LED.
Getting a better picture
Crop to the subject before you start, and raise the contrast if the preview looks flat. Avoid busy backgrounds; a plain or blurred background makes the subject stand out. Very dark photos lose detail in the shadows because the thickest parts let almost no light through.
Related tools
- Make Background Transparent / Replace a Color
Click a color to make it transparent — perfect for logos and product shots on plain backgrounds — or replace it with another color. Adjustable tolerance.
- Pixels to Inches / cm & Print Size Calculator
Convert pixels to inches, centimeters and millimeters at any DPI — and find the largest print size an image supports, or the pixels you need for a print.
- Add Text / Watermark to Photo
Add text, a watermark or a date stamp to photos — choose font, size, color, position, opacity and a tiled watermark pattern.
- Before & After Image Slider Maker
Compare two photos with a draggable before/after slider — then export embeddable HTML, a snapshot image, or an animated GIF for social media. Great for edits, renovations and results.
- Insert Images into PDF
Add photos, scans or diagrams to an existing PDF as new pages, placed exactly where you want them.
- Rasterize PDF (Image-only PDF)
Turn every page of a PDF into a picture, so the result looks the same but has no selectable text, hidden content, form fields, scripts or editable layers. Choose resolution, colour and JPEG or PNG.