Account

What new tool do you want?

PDF Tools

KDP Formatting Checker (Amazon Paperback)

Check your book's interior PDF against Amazon KDP paperback rules before uploading — trim size, bleed, page count, gutter and outside margins, embedded fonts — and get your cover's spine width.

How to use

  1. 1Upload your interior PDF.
  2. 2Choose the trim size, ink and paper, and whether you use bleed.
  3. 3Fix any problems listed, then upload to KDP.

Frequently asked questions

What gutter margin do I need?

It depends on page count: 0.375" up to 150 pages, 0.5" to 300, 0.625" to 500, 0.75" to 700 and 0.875" above that.

What is bleed?

If images or colors reach the page edge, pages must be 0.125" wider and 0.25" taller than the trim size so nothing is lost when trimmed.

Is KDP's previewer still needed?

Yes — it has the final word. This tool catches the common problems first.

How the gutter and margin checks actually measure your pages

This isn't a checklist you tick off manually — the tool opens the PDF's real text layer page by page and finds the exact pixel bounds of every character, then converts that into inches from each edge. It treats odd pages as the right-hand (recto) page and even pages as the left-hand (verso) page, so the 'inside' margin — the one nearest the spine, which KDP requires to be wider — is checked against the correct edge on each side, not just a flat margin on every page. This per-page, per-character measurement is why it can tell you precisely which page has a problem rather than a vague pass or fail.

Why the gutter requirement scales with page count

KDP's minimum inside margin isn't fixed — it grows with the book's thickness, because a thicker spine physically eats more of the inside margin when the book is open: 0.375 inches up to 150 pages, 0.5 up to 300, 0.625 up to 500, 0.75 up to 700, and 0.875 beyond that. The tool computes this threshold automatically from your document's actual page count before checking every page's text position against it, so a 280-page manuscript is correctly held to the 0.5-inch standard while a 60-page one only needs 0.375 — getting this wrong is one of the most common reasons KDP rejects or flags a paperback interior.

What bleed changes, and why the spine width matters separately

Checking 'images/colors reach the page edge' changes the expected page dimensions by adding 0.125 inches to the width and 0.25 inches to the height beyond the trim size, and raises the required outside margin from 0.25 to 0.375 inches — because content meant to bleed off the page edge needs that extra margin trimmed away during binding without clipping any text. Separately, the tool calculates spine width from page count and your chosen ink/paper combination (each with a different page thickness constant, e.g. 0.002252 inches per sheet for black-and-white on white paper), which is the number you hand to KDP's cover template tool — it also flags that KDP only allows spine text once a book exceeds 79 pages.

Example: a 220-page novel manuscript failing on its first check

A first-time author exports a 220-page, 6×9 novel manuscript from Word and runs it through this checker before uploading. The report flags two problems: the gutter check shows 14 pages with text sitting only 0.3 inches from the spine (below the 0.5-inch minimum required at 220 pages, per the page-count-based scale), and the font check shows one font, a decorative chapter-heading typeface, isn't embedded. Both are fixable before ever touching KDP's interface — widening the inside margin in Word's page setup and re-exporting with 'embed all fonts' checked — and the tool also reports the calculated spine width (around 0.495 inches for 220 pages on white paper) to carry over into the cover design.

Related tools

More: PDF Tools