Account

What new tool do you want?

PDF Tools

PDF Booklet Maker (Imposition)

Rearrange a PDF into booklet order — two pages per sheet side, ready to print double-sided, fold and staple — with blank pages added automatically.

How to use

  1. 1Add your PDF (in normal reading order).
  2. 2Choose the sheet size and press Make booklet. Print double-sided, flip on the short edge, then fold and staple.

Frequently asked questions

Why are blank pages added?

A booklet needs a multiple of 4 pages; blanks are added at the end if needed.

Which print setting do I use?

Double-sided, flip on the short edge, 100% scale (no 'fit to page').

What size will the booklet be?

Half the sheet: A4 sheets make an A5 booklet; Letter makes a 5.5 × 8.5 in booklet.

Why page order on a printed sheet isn't the reading order

A saddle-stitched booklet (sheets folded in half and stapled along the fold) only works if the pages land in a specific scrambled order on each sheet — the very first sheet needs to carry the last page and the first page side by side, because once folded, that outer sheet wraps around the entire booklet. This tool computes that imposition order automatically: for an n-page document it pairs page n with page 1 on the first sheet's front, page 2 with page n-1 on its back, and works inward from there, which is the standard saddle-stitch sequence that makes the final folded, stapled booklet read in correct order from page 1 straight through to the end.

Why page count always rounds up to a multiple of 4

Each physical sheet, once folded, contributes exactly 4 page-positions to the booklet (2 on the front, 2 on the back), so a booklet can only be built from page counts divisible by 4 — a 22-page document becomes 24 internally, with 2 blank pages added at the end before the imposition math runs. The tool shows this upfront ('22 pages → 6 sheets (2 blank pages added)') rather than surprising you with unexpected blanks in the output, and the blanks always land at the very end of the reading order, not scattered through the middle.

Why the print settings in the FAQ aren't optional suggestions

The output PDF is built at a fixed landscape sheet size (A4 or Letter) with two half-size pages already positioned side by side — if your printer's driver is set to 'fit to page' or scales the output at all, the careful half-sheet positioning this tool calculated gets distorted and the fold won't land where the content expects it to. Printing at exactly 100% scale, double-sided, flipping on the short edge (not the long edge) is what makes the front and back of each folded sheet align correctly — getting any of those three settings wrong produces a booklet where pages are offset or appear upside-down relative to their neighbors.

Example: turning a 10-page newsletter into a foldable booklet

A 10-page newsletter needs to go out as a simple folded, stapled booklet for a community group. Uploading it here shows '10 pages → 3 sheets (2 blank pages added)' since 10 rounds up to 12 (3 sheets × 4 pages), with the 2 blanks landing at the very end of the reading order rather than interrupting the newsletter's content. Choosing A4 produces an A5-sized booklet; printing the 3-sheet result double-sided at 100% scale with short-edge flip, then folding the stack in half and stapling along the crease, produces a booklet that reads correctly from the newsletter's cover through to its last page, with the two blank pages appearing only at the very back where they're least noticeable.

Related tools

More: PDF Tools