Account

What new tool do you want?

Cooking & Food

ABV Calculator (Homebrew & Cocktails)

Calculate alcohol by volume for homebrewed beer, wine or cider from original and final gravity — or the strength of a mixed cocktail from its ingredients.

How to use

  1. 1For brewing, enter the original gravity (OG) before fermentation and final gravity (FG) after.
  2. 2For a cocktail, list each ingredient as 'ml abv%' and choose the dilution from shaking or stirring.

How it's calculated

Brewing: ABV ≈ (OG − FG) × 131.25. Cocktail: ABV = Σ(volume × abv) ÷ total volume after dilution (shaken ≈ +25% water, stirred ≈ +20%).

Frequently asked questions

How accurate is the (OG − FG) × 131.25 formula?

Very close for normal-strength beers. Above about 8% ABV, the 'alternate' formula gives slightly higher, more accurate values.

What is gravity?

The density of the wort or must relative to water, measured with a hydrometer — sugar makes it heavier; fermentation lowers it.

Why does dilution matter for cocktails?

Ice melts into the drink while shaking or stirring, adding 20–25% water and lowering the strength.

Why gravity readings, not a direct measurement, are how homebrewers find ABV

There's no simple tool that measures alcohol content directly in a fermenting liquid, but a hydrometer can easily measure specific gravity — how dense the liquid is relative to plain water — and that's enough to infer alcohol content indirectly: dissolved sugar makes wort denser than water (a high original gravity), and fermentation converts that sugar into alcohol and CO2, which lowers the density back down (a lower final gravity). The gap between those two readings, multiplied by a calibration constant (131.25), estimates how much sugar was actually converted to alcohol.

Worked example: ABV Calculator

A beer starting at 1.050 original gravity and finishing at 1.010 final gravity gives ABV = (1.050 - 1.010) × 131.25 = 5.25% — a typical session beer strength. The same two readings also give an apparent attenuation of (0.040 ÷ 0.050) × 100 = 80%, meaning the yeast consumed about 80% of the fermentable sugars present, a separate useful number for diagnosing whether a fermentation finished as expected for that yeast strain and wort. For a cocktail with 60ml of 40% spirit and two 30ml mixers at 0% ABV, with no dilution from ice, the total alcohol (60×40/100 = 24ml pure alcohol) divided by the total 120ml volume gives a 20% ABV finished drink.

Why the simple formula gets less accurate at higher ABVs

The FAQ's note that the 131.25 formula is 'very close' at normal beer strength but increasingly imprecise above about 8% ABV reflects that the formula is a linear approximation of what's actually a slightly nonlinear relationship between gravity change and alcohol content — the approximation holds well across the gravity range typical beers occupy, but strong beers, meads and wines fermenting through a much larger gravity drop exceed the range where the simple linear formula stays accurate, which is why serious high-ABV brewers switch to a more complex alternate formula for those cases.

Why ice dilution is treated as a real percentage, not an afterthought

Calculating a cocktail's ABV purely from its poured ingredients, ignoring dilution, systematically overstates the drink's actual strength — ice genuinely melts into a shaken or stirred drink, adding real water volume (roughly 20-25% more liquid) that dilutes the alcohol concentration in the final glass. Building that dilution percentage directly into the total-volume denominator, rather than treating it as a minor footnote, is what makes the calculated ABV reflect what's actually in the glass by the time it's served, not just what went into the shaker.

Related tools

More: Cooking & Food