Account

What new tool do you want?

Cooking & Food

Baking Pan Size Converter

Adapt a recipe to a different pan size — round, square or rectangular — with the scaling factor for ingredients and tips for baking time.

How to use

  1. 1Enter the original pan and the pan you'll use (inches).
  2. 2Multiply ingredients by the factor; keep the depth similar and adjust baking time.

How it's calculated

Round area = π × (diameter ÷ 2)²; square/rectangle = length × width. Scale factor = new area ÷ original area.

Frequently asked questions

Do I need to change the baking time?

If the batter depth stays about the same, time changes little. Shallower batter bakes faster; deeper batter takes longer — test with a skewer.

Can I bake a 9 × 13 recipe in two 8-inch rounds?

Yes — two 8 in rounds (≈ 100 in²) hold about the same as one 9 × 13 in pan (117 in²) minus a little.

What about the temperature?

Keep it the same in most cases. For much deeper pans, lower it by about 25 °F and bake longer.

Why area, not diameter, is what actually determines the scaling factor

An 8-inch round pan and a 9-inch round pan look like a modest size difference, but area scales with the square of the radius, not linearly with diameter — so the real difference in how much batter each pan holds is much larger than the 1-inch diameter gap suggests. This is exactly why the calculator works in square inches of area rather than comparing diameters or side lengths directly: area is what actually determines how much batter fits at a given depth, which is the number that matters for scaling a recipe correctly.

Worked example: Baking Pan Size Converter

An 8-inch round pan has an area of π × 4² ≈ 50.27 in². Switching to a 9×13 rectangular pan (117 in²) gives a scale factor of about 2.33× — meaning the recipe's ingredients all need multiplying by roughly 2.33 to fill the new pan to a similar depth, not the smaller-looking jump the diameter-to-side-length numbers alone might suggest. This also explains the FAQ's specific claim that two 8-inch rounds (about 100 in² combined) hold roughly the same volume as one 9×13 pan (117 in²) minus a little — both figures come from the same area-based math, just applied to two round pans instead of one rectangle.

Why matching area doesn't automatically mean matching bake time

Scaling ingredients to fill a new pan to a similar depth is only half the problem — the FAQ notes that if batter depth stays roughly the same, baking time changes little, but a pan swap that changes the depth (a wider, shallower pan versus the original) bakes faster because heat penetrates a thinner layer more quickly, while a narrower, deeper pan takes longer and risks an underdone center if the original time is used unchanged. Testing doneness with a skewer, rather than trusting a straight-across time from the original recipe, is the practical safeguard this calculator's scale factor alone can't provide.

Why shaped pans like bundt or tube tins fall outside this calculator's math

The round and rectangle formulas here both assume a flat-bottomed pan with straight sides, so area alone determines batter volume at a given depth — a bundt pan's central tube, or a springform's sometimes-sloped sides, removes volume that a simple diameter or length-times-width calculation doesn't account for. For those shapes, the safer approach is to fill the actual pan with water to the intended batter depth and measure that volume directly, rather than trusting an area-based scale factor meant for plain round or rectangular tins.

Related tools

More: Cooking & Food