Account

What new tool do you want?

Cooking & Food

Oven Temperature & Air Fryer Converter

Convert oven temperatures between °F, °C, fan (convection) and gas mark — and convert oven recipes to air fryer temperature and time.

How to use

  1. 1Enter a temperature and its unit, and the recipe's cooking time.
  2. 2Read the equivalent in every oven type, plus the air fryer adjustment.

How it's calculated

°C = (°F − 32) × 5⁄9. Fan/convection ovens: about 20 °C (25 °F) lower. Air fryer: reduce the temperature by about 25 °F (15 °C) and the time by about 20%, checking early.

Frequently asked questions

Why lower the temperature for fan ovens?

Circulating air transfers heat faster, so food cooks as if the oven were about 20 °C hotter.

What is gas mark 4?

About 180 °C (350 °F) — the most common baking temperature.

Do all air fryer conversions work?

They're a starting point. Air fryers vary, and large or wet foods (batters, casseroles) may not suit them. Check a few minutes early.

Why a fan oven needs its own conversion, not just °F-to-°C math

Converting 350°F to Celsius is pure arithmetic ((350-32)×5/9 = 177°C), but fan/convection ovens cook food faster than the same numerical temperature in a conventional oven because circulating air transfers heat to food more efficiently than still air does — which is why a recipe written for a conventional oven needs its temperature lowered by about 20°C (25°F) when baked in a fan oven, a physical cooking-behavior adjustment layered on top of the pure unit conversion.

Worked example: Oven Temperature & Air Fryer Converter

350°F converts to 177°C conventional, 157°C in a fan oven (the 20°C reduction applied), and sits at gas mark 4 — the most common baking temperature, confirmed by the FAQ. For a 30-minute recipe converted to an air fryer, the tool reduces the temperature by 25°F (to 325°F / 162°C) and the time by about 20% (to roughly 24 minutes), reflecting that air fryers are essentially small, very efficient convection ovens that cook food notably faster than a standard oven at the same nominal temperature.

Why gas mark doesn't map onto temperature with a clean formula

Unlike °F-to-°C, which is a continuous linear conversion, gas marks are a fixed, discrete scale (1 through 9) that the UK gas oven industry standardized decades ago — which is why this tool looks up the nearest gas mark from a table rather than computing it mathematically, and why entering gas mark 6 returns exactly 200°C/392°F rather than some in-between, non-standard value. There's no gas mark 6.5 to convert to, since the scale itself only has nine defined points.

Why air fryer conversions are explicitly a starting point, not a guarantee

The FAQ is direct that air fryers vary significantly between models, and that wet or batter-heavy foods (casseroles, cake batters) often don't translate well to an air fryer's smaller, more intense convection environment regardless of what temperature and time adjustment is applied. Checking food a few minutes before the converted time elapses is the practical safeguard this tool's own guidance recommends, since the 20%-time-reduction rule is an average starting estimate, not a precise calculation validated against your specific air fryer and food.

Why entering a temperature below gas mark 1 returns a message instead of a number

Gas mark is a fixed scale that bottoms out at mark 1 (around 140°C/275°F), reflecting the lowest temperature a traditional gas oven's thermostat and pilot system can reliably hold — there's no 'gas mark 0' or negative gas mark in real ovens, so the calculator reports 'Below gas mark 1' for any conventional temperature under about 130°C rather than extrapolating a meaningless fractional gas mark. That boundary is a genuine physical limit of the scale, not an arbitrary cutoff in the code.

Related tools

More: Cooking & Food