Health & Fitness
Pupillary Distance (PD) Measurer — Measure PD from a Photo
Measure your pupillary distance (PD) for ordering glasses online, using a photo of yourself holding a standard bank or ID card for scale. Click the card edges and your pupils — the photo never leaves your device.
For general information only — not medical advice. Results are estimates; talk to a doctor or qualified health professional about your own health.
How to use
- 1Take a straight-on photo (arm's length) looking at the camera, with a bank or ID card held flat against your forehead, magnetic stripe facing out.
- 2Upload it, then click the card's left edge, right edge, your left pupil and your right pupil.
- 3Repeat with 2–3 photos and use the average. Typical adult PD is 54–74 mm.
Frequently asked questions
How accurate is this?
Usually within 1–2 mm if the card is flat, level with your eyes and you look straight at the camera from at least 40 cm away. For strong prescriptions or progressive lenses, ask your optician to measure.
Single PD or dual PD?
Single PD is the distance between pupils. Dual (monocular) PD is each pupil to the centre of the nose bridge — click the bridge too to get it.
Why a card?
Standard bank and ID cards (ISO/IEC 7810 ID-1) are exactly 85.60 mm wide, giving a known scale for the photo.
Why literally any bank or ID card works
Every card that conforms to the ISO/IEC 7810 ID-1 standard — essentially every debit card, credit card, driver's licence and most ID cards worldwide — is manufactured to exactly 85.60 mm wide, regardless of issuer or country. That universal, fixed dimension is what makes the whole measurement possible: clicking the card's two edges gives a pixel distance that corresponds to a known real-world length, and every other distance in the photo gets converted to millimetres using that same ratio, the same principle as including a ruler or scale bar in a scientific photograph.
Why resizing the browser window doesn't change your result
Clicks are recorded as a fraction of the image's displayed size, but distances are calculated using the photo's natural pixel dimensions rather than however large it happens to be rendered on screen at the moment you clicked. That distinction matters because without it, zooming the page or viewing the photo at a different window size would shift the apparent pixel distances between points and quietly change the computed PD — converting back to the original resolution before measuring keeps the result stable no matter how the image is displayed.
The error that card-clicking precision can't fix
However carefully you click the four or five points, the measurement is only as good as one assumption: that the card sits in the same flat plane as your eyes when the photo was taken. If the card is tilted toward or away from the camera even slightly, its edges no longer span the true 85.6 mm at the distance your pupils are from the lens, which throws off the scale factor used for every other measurement in the photo — a geometric (perspective) error that's larger than any mistake from clicking a point a pixel or two off target. That's why the instructions specifically call for a straight-on photo from at least 40 cm away with the card flat against the forehead, and why averaging 2–3 separate photos is recommended — it catches an inconsistent angle in any single shot.
Why there's a fifth, optional point
Single PD — the distance between your two pupils — only needs the four required points. Dual (monocular) PD measures each eye separately from its pupil to the centre of the nose bridge, which matters for stronger prescriptions and progressive lenses because the optical centre needed in each lens isn't always perfectly symmetric around the face's midline. Clicking that fifth, optional point gives both monocular numbers at once, without needing a second round of edge- and pupil-clicking. The whole process also happens without ever leaving your device — there's no upload step, just a local object URL the browser reads directly from the file you chose.
Related tools
- Body Fat Calculator (US Navy Method)
Estimate body fat percentage from your neck, waist (and hip) measurements and height with the US Navy tape method, plus fat and lean mass.
- Steps to Miles / Km Calculator
Convert a step count into miles or kilometres using your height (or a measured stride length), plus a rough calorie estimate.
- BMI Calculator
Calculate your body mass index from height and weight in metric or US units, see your WHO weight category and the healthy weight range for your height.
- Calorie Calculator (TDEE & BMR)
Estimate your daily calorie needs (TDEE) and resting metabolic rate (BMR) with the Mifflin-St Jeor equation, plus targets to lose or gain weight.
- Macro Calculator
Split your daily calories into protein, carbohydrate and fat grams — balanced, high-protein, low-carb or keto — or set your own percentages.
- Protein Intake Calculator
Find how much protein you need per day based on body weight and goal — general health, endurance, building muscle or losing fat.