Health & Fitness
Cycling Gear, Cadence & Speed Calculator
Calculate bike speed from cadence and gearing (chainring, cog, wheel size), plus gear ratio, gear inches and development.
For general information only — not medical advice. Results are estimates; talk to a doctor or qualified health professional about your own health.
How to use
- 1Enter your chainring and cog teeth and choose your wheel/tyre size.
- 2Enter your cadence to see the speed.
How it's calculated
Speed = cadence × (chainring ÷ cog) × wheel circumference × 60. Gear inches = (chainring ÷ cog) × wheel diameter (in). Development = metres travelled per pedal revolution.
Frequently asked questions
What cadence should I ride at?
Many riders cruise at 80–95 rpm. Higher cadences reduce strain on the knees and muscles at the same speed.
What's wheel circumference for 700×25c?
About 2,105 mm; 700×28c is about 2,136 mm and 29×2.2" MTB about 2,326 mm. Measure yours for best accuracy.
Why compare gear inches?
It lets you compare gearing across different chainrings, cogs and wheel sizes on one scale.
Why gear ratio alone doesn't tell you speed
Chainring teeth divided by cog teeth gives a gear ratio — how many times the rear wheel turns per pedal stroke — but that ratio means nothing for actual speed until it's multiplied by how far the wheel travels per rotation. That's why wheel and tyre size is a required input here rather than an afterthought: the same 2.94 gear ratio produces meaningfully different real-world speeds on a 26-inch mountain bike wheel versus a 700c road wheel, simply because the bigger wheel covers more ground per rotation.
Why gear inches is still the standard comparison unit
Gear inches is a holdover from the era of penny-farthing bicycles, where the front wheel was pedaled directly and its diameter in inches was literally the gear — a 60-inch wheel meant 60 inches of travel per pedal revolution. Modern drivetrains use chainrings and cogs instead, but gear inches survived as a way to express any gear combination, on any bike, as 'equivalent to a direct-drive wheel of this diameter,' which is exactly why it's useful for comparing a mountain bike's gearing against a road bike's on one common scale.
What cadence changes even though the gear stays the same
For a fixed gear ratio and wheel size, speed scales directly with cadence — pedaling at 100 rpm instead of 80 rpm in the same gear produces 25% more speed, with no change in how hard each pedal stroke feels against the gear's resistance. That's the appeal of a higher cadence in general cycling: riders can hold a given speed using a lower, easier gear at a higher cadence instead of a bigger, harder gear at a lower one, which is often described as easier on the knees since it trades muscular force for a faster, lighter pedaling rhythm.
Worked example: Cycling Gear, Cadence & Speed Calculator
With a 50-tooth chainring, a 17-tooth cog, a 700×25c wheel (2,105 mm circumference) and a cadence of 90 rpm, the gear ratio is 50 ÷ 17 ≈ 2.94, giving a speed of roughly 33.4 km/h (about 20.8 mph). The same gearing works out to about 77.6 gear inches, and a 'development' of roughly 6.19 metres travelled for every single pedal revolution — the number that would change immediately if the rider switched to a wider 700×32c tyre without touching the gearing at all.
A cog of zero stops the calculation
The boxes open at a 50-tooth chainring, a 17-tooth cog, a 700×25c wheel listed as 2105 mm, and 90 rpm. Those millimetre figures are circumferences, not diameters, and speed scales directly with them. Clear the cog or set it to zero and you get a message to enter the cog teeth, instead of an infinite speed. Switching the wheel to 700×32c, listed as 2155 mm, changes speed, gear inches, and development together while the chainring, cog, and cadence stay where they are. Miles per hour is the kilometre speed divided by 1.609344, shown to one decimal, the same precision as the kilometre figure. Gear ratio is shown to two decimals, and development is metres travelled per pedal revolution, also to two decimals.
Related tools
- Waist-to-Hip & Waist-to-Height Ratio Calculator
Calculate your waist-to-hip and waist-to-height ratios — simple measures of abdominal fat linked to heart and metabolic health risk.
- Running Pace Calculator
Calculate running pace, finish time or distance — per km or per mile — with speed in km/h and mph and splits for the whole race.
- Cholesterol Ratio Calculator
Calculate your total-to-HDL cholesterol ratio, LDL-to-HDL ratio and non-HDL cholesterol from a lipid panel, in mg/dL or mmol/L.
- Reaction Time Test
Test your reaction time — click as soon as the screen turns green. See your average over 5 tries and how you compare with typical human reaction times.
- BMI Calculator
Calculate your body mass index from height and weight in metric or US units, see your WHO weight category and the healthy weight range for your height.
- Torque & Gear Ratio Calculator
Calculate torque from force and lever arm, and a gear train's ratio, output speed and output torque from the tooth counts.