Account

What new tool do you want?

Health & Fitness

Barbell Plate Calculator

Work out which plates to load on each side of the barbell to hit a target weight, in kilograms or pounds, with your available plates.

For general information only — not medical advice. Results are estimates; talk to a doctor or qualified health professional about your own health.

How to use

  1. 1Enter the target total weight and the bar weight.
  2. 2Adjust the list of plates you have — the heaviest plates are used first.

How it's calculated

Weight per side = (target − bar) ÷ 2. Plates are chosen greedily from heaviest to lightest.

Frequently asked questions

How much does an Olympic bar weigh?

A men's Olympic bar is 20 kg (about 44 lb, often rounded to 45 lb); a women's bar is 15 kg (33–35 lb).

What if the weight can't be made exactly?

The calculator shows the closest weight below your target with the plates you have, and the difference.

Should I include collars?

Competition collars weigh 2.5 kg each. Add them to the bar weight if you use them.

Why the plate list order matters

The calculator works through your available plates heaviest-first, loading as many of the biggest plate as will fit per side, then moving to the next size down for whatever weight remains — the same way most lifters load a bar by hand. This greedy approach gets the exact target whenever your smallest plate size evenly resolves the final gap, which standard gym plate sets (25/20/15/10/5/2.5/1.25 kg or 45/35/25/10/5/2.5 lb) are designed to do. If your plate list is missing small enough increments, the 'short of target by' output tells you exactly how much weight the greedy fill couldn't place, rather than silently rounding or guessing.

Why bar weight is a field, not an assumption

Olympic bars aren't all the same weight — a men's bar is 20 kg (often rounded to 45 lb even though it's closer to 44), a women's bar is 15 kg, and many gym and home bars fall outside both standards entirely. Because every other number in the calculation depends on correctly subtracting the bar weight first, getting this field right matters more than it might seem: a bar that's actually 15 kg entered as 20 kg will make the suggested plate loading 5 kg light on the total, split as 2.5 kg too little on each side.

Why the math works in halves, not whole plates

The target weight is split in two before plates are chosen, because a barbell has to be loaded symmetrically — this calculator is working out what goes on one side, then doubling it to check the total. That's also why asymmetric totals (an odd number of a given plate that can't be mirrored on both sides) aren't offered as an option: the 'each side' output always represents a loading that can be physically duplicated on the other end of the bar.

Worked example: Barbell Plate Calculator

To hit 142.5 kg total on a 20 kg bar, the calculator needs 61.25 kg on each side. Working down the plate list, two 25s use 50 kg, leaving 11.25 kg; a 10 covers 10 kg of that, leaving 1.25 kg; and a 1.25 plate finishes it exactly. The result reads '2×25 + 1×10 + 1×1.25' per side, for a total loaded weight of exactly 142.5 kg with nothing short.

A plate size is not a count of plates you own

The box is a list of sizes, and each size is treated as unlimited. Write 25 once and as many 25s as fit will be suggested, even if you only own one pair. The order you type does not stick: sizes are sorted heaviest first, and zeros or words are ignored. If the target equals the bar, the side reads No plates and the shortfall is zero. If the sizes cannot hit the target, Total loaded stops short and Short of target by shows the rest. A target lighter than the bar is rejected, and a list with no usable sizes is rejected instead of assuming a standard set. The page opens at 142.5 on a 20 bar with the usual kilogram plates.

Related tools

More: Health & Fitness