Account

What new tool do you want?

Auto & Travel

Stopping Distance Calculator

Calculate total stopping distance at any speed — reaction distance plus braking distance — for dry, wet or icy roads.

How to use

  1. 1Enter the speed and choose the road condition.
  2. 2Adjust reaction time if needed (1.5 s is a common planning value).

How it's calculated

Reaction distance = speed × reaction time. Braking distance = v² ÷ (2 × μ × g), with friction μ ≈ 0.7 dry, 0.4 wet, 0.1 icy.

Frequently asked questions

Why does speed matter so much?

Braking distance grows with the square of speed — doubling your speed quadruples the braking distance.

What's a safe following distance?

At least a 2-second gap in good conditions (3–4 seconds recommended in the US), double in the wet and much more on ice.

How accurate is this?

It's an estimate — tyres, brakes, road surface, slope and vehicle load all change real stopping distances.

Why reaction distance and braking distance grow at different rates

Reaction distance is just speed × reaction time — it scales linearly, so doubling your speed exactly doubles how far you travel before your foot even reaches the brake. Braking distance comes from kinetic energy physics (v² ÷ (2 × μ × g)) and scales with the square of speed, so doubling your speed quadruples the braking distance alone. At low speeds reaction distance dominates the total; at highway speeds braking distance takes over completely, which is exactly why high-speed crashes are disproportionately more severe than the speed difference alone suggests.

Worked example: Stopping Distance Calculator

At 100 km/h (27.78 m/s) on dry asphalt (friction coefficient μ ≈ 0.7) with a 1.5-second reaction time, reaction distance is 27.78 × 1.5 ≈ 41.7 m, and braking distance is 27.78² ÷ (2 × 0.7 × 9.80665) ≈ 56.2 m, for a total of about 97.9 m — nearly the length of a football pitch. Switch only the road surface to ice (μ ≈ 0.1) at the same speed and braking distance alone jumps to roughly 393 m, seven times longer, because braking distance is inversely proportional to the friction coefficient.

Why the friction numbers are typical values, not guarantees

The μ values used here (0.7 dry, 0.4 wet, 0.2 snow, 0.1 ice) are representative figures for a car with reasonably good tires and working brakes on a level road — actual grip varies with tire tread depth and compound, road surface and slope, vehicle weight distribution, and how worn the brakes are. Treat the output as a planning estimate for following distance, not a precise prediction for any specific vehicle and road.

Miles per hour and kilometres per hour do not share a screen unit

Speed starts at 60 miles per hour, dry asphalt, 1.5 seconds of reaction. Miles per hour are converted with 0.44704 and kilometres per hour by dividing by 3.6, then reaction distance is that speed times the reaction time. Braking distance uses the speed squared over twice the friction times 9.80665. Friction is 0.7, 0.4, 0.2, or 0.1 from the road menu, including snow, which sits between wet and ice. When the speed unit is miles per hour, the three distances are shown in feet, using 3.28084, as whole numbers, and a separate line gives the total in metres to one decimal. In kilometres per hour those three lines are already metres. A 100 kilometre-per-hour dry stop with 1.5 seconds is about 97.9 metres.

Related tools

More: Auto & Travel