Account

What new tool do you want?

Auto & Travel

Tire Pressure Calculator & Guide

Check if your tires are properly inflated — adjust the recommended pressure for temperature and hot tires, convert PSI, bar and kPa, and see typical pressures by vehicle type.

How to use

  1. 1Enter the recommended cold pressure from your door-jamb sticker.
  2. 2Enter the pressure you measured and whether the tires were cold or recently driven.
  3. 3See how much air to add or let out.

How it's calculated

Tire pressure changes about 1 PSI per 10 °F (0.1 bar per 10 °C). Driving warms tires and adds roughly 2–4 PSI, so recommended pressures are always 'cold' (parked 3+ hours).

Frequently asked questions

Where do I find my correct tire pressure?

On the sticker inside the driver's door jamb (or fuel flap / owner's manual) — not the 'max pressure' on the tire sidewall.

Why does my TPMS light come on in winter?

Cold air lowers pressure about 1 PSI per 10 °F drop. Top up to the recommended cold pressure when temperatures fall.

Is it bad to overinflate?

Slightly high pressure wears the center of the tread and reduces grip; low pressure wears the edges, hurts fuel economy and can overheat the tire.

Why 'cold' is the only pressure that means anything

Air pressure inside a sealed tire rises as the air heats up, purely from the gas laws — roughly 1 PSI for every 10°F — and driving heats tires through friction and flexing, typically adding 2–4 PSI within a couple of miles. A door-sticker recommendation is always a cold-tire number (measured after sitting for 3+ hours), so checking a tire right after a drive and comparing it directly to that number will always make the tire look over-inflated even when it's actually correctly set. That's why this calculator asks whether the tire was cold, driven a short distance, or hot, and subtracts an estimated 0 / 1 / 3 PSI accordingly before comparing it to the target.

Worked example: Tire Pressure Calculator & Guide

With a 35 PSI target and a hot reading of 38 PSI, subtracting the assumed 3 PSI of heat gives a cold-equivalent of 35 PSI — exactly on target, so the verdict reads 'OK' even though 38 looks 3 PSI high at a glance. If the forecast also shows the temperature will drop from 50°F now to 30°F overnight, the calculator adds roughly (50 − 30) ÷ 10 = 2 more PSI to the fill-up recommendation, landing on 40 PSI at the pump now — a deliberate overfill today so the tire doesn't read low once the cold morning arrives.

Why the sidewall number isn't what you want

The pressure printed on the tire's sidewall is its maximum rated pressure for the tire itself, independent of the vehicle it's mounted on — using it as a target routinely over-inflates a car, since the vehicle manufacturer's door-sticker figure already accounts for the car's actual weight distribution and ride characteristics. Over-inflation wears the center of the tread first and reduces wet grip; under-inflation wears the outer edges, raises fuel consumption, and risks overheating the tire at speed.

Within 1 psi is called OK, and the cold morning is added only if it drops

The target has to be above 5 psi after conversion, and the measured pressure above zero. Bar and kilopascals are turned into psi for the comparison, then turned back, bar to two decimals and the others to one. A hot reading subtracts 3 psi, a short drive subtracts 1, and a cold reading subtracts nothing, before the difference from the door-sticker target is judged. If that difference is under 1 psi either way, the status is OK rather than low or high. The fill-to pressure is the target plus the heat I have to put back, plus any expected drop of more than half a psi from a colder forecast, at 1 psi per 10 °F.

Related tools

More: Auto & Travel