Account

What new tool do you want?

Auto & Travel

Towing Capacity Calculator

Check whether your vehicle can safely tow a trailer — trailer weight vs rating, tongue weight, payload and the combined weight limit.

How to use

  1. 1Enter your vehicle's ratings from the door-jamb sticker and manual: towing capacity, GCWR and payload.
  2. 2Enter the loaded trailer weight and the passengers and cargo in the vehicle.

How it's calculated

Tongue weight ≈ 10–15% of trailer weight (10% used). Payload used = passengers + cargo + tongue weight. Combined = vehicle curb weight + payload + trailer ≤ GCWR. Many experts suggest staying under 80% of the towing capacity.

Frequently asked questions

Why does tongue weight matter?

Too little tongue weight makes a trailer sway; too much overloads the rear axle. 10–15% of the trailer's weight is typical for conventional hitches.

Where do I find my ratings?

The tire and loading sticker on the driver's door jamb, the owner's manual and the hitch label. Use the lowest limit that applies.

Why the 80% rule?

A margin helps on hills, in wind and when braking. Towing at the maximum rating is legal but leaves no room for error.

Why towing safely means checking three separate limits, not one

A trailer can be under the vehicle's towing capacity and still make the combination unsafe, because towing capacity, payload capacity and GCWR (gross combined weight rating — the maximum for vehicle plus trailer plus everything in both) are three independent limits that can each be exceeded on their own. A heavy trailer's tongue weight — estimated here at 10% of trailer weight, within the typical 10–15% range for conventional hitches — counts against the vehicle's payload capacity alongside passengers and cargo, so a truck rated to tow plenty can still be over its payload limit once the tongue weight and a full cab are added in.

A worked example of all three limits in action

With a 7,500 lb towing capacity, 13,000 lb GCWR, 1,600 lb payload, 5,000 lb curb weight, 600 lb of passengers and cargo, and a 6,000 lb trailer, the setup passes all three checks: the trailer is under capacity, the estimated 600 lb tongue weight plus 600 lb of passengers (1,200 lb total) is under the 1,600 lb payload limit, and the combined weight (5,000 + 600 + 6,000 = 11,600 lb) is under the 13,000 lb GCWR — with 400 lb of payload and 1,400 lb of GCWR still in reserve. Push the trailer to 7,000 lb instead and it's still under every hard limit, but now above 80% of the towing capacity, which the calculator flags separately since that's a safety margin recommendation, not a regulatory limit. At 8,000 lb the trailer alone exceeds the 7,500 lb towing capacity outright — the setup fails regardless of what the other two numbers say.

Why the 80% margin matters even when you're technically within the rating

A manufacturer's maximum towing rating is typically tested under close to ideal conditions — flat ground, mild weather, a specific test configuration. Real towing adds hills, wind, and emergency braking scenarios the rated maximum doesn't necessarily account for comfortably, which is why staying under about 80% of the rated capacity is widely recommended even though towing right up to the rated limit is perfectly legal.

Tongue weight is always a tenth, and the combined figure skips it

The defaults are a 7,500 pound tow rating, 13,000 pound combined rating, 1,600 pound payload, 5,000 pound curb weight, 600 pounds of people and cargo, and a 6,000 pound trailer. Tongue weight is exactly 10 percent of the trailer, not a value I can set to 12 or 15 percent. Payload used is people plus that tongue weight. The combined weight is curb plus people plus the full trailer, and it does not add the tongue weight again, because the tongue is already part of the trailer. The passing message upgrades to a warning when the trailer is over 80 percent of the tow rating even though every hard limit still holds. At 7,000 pounds on these defaults that warning appears.

Related tools

More: Auto & Travel