Account

What new tool do you want?

Auto & Travel

Bike Frame Size Calculator

Find your bike frame size for road, mountain, gravel or hybrid bikes from your inseam — in centimetres and inches, with the typical S/M/L size.

How to use

  1. 1Measure your inseam: stand against a wall with a book pressed up between your legs, and measure from its top edge to the floor.
  2. 2Choose the bike type.

How it's calculated

Road/gravel: frame ≈ inseam (cm) × 0.665. Mountain: frame (inches) ≈ inseam (cm) × 0.226. Hybrid: ≈ inseam (cm) × 0.685. Always test ride — geometry varies by brand.

Frequently asked questions

Why use inseam instead of height?

Leg length determines standover height and saddle reach far better than overall height.

I'm between two sizes — which should I pick?

A smaller frame is usually more agile and easier to adjust up; a larger one more stretched and stable. Try both if you can.

Do brands size the same?

No — always check the manufacturer's own chart; this gives a starting point.

Why mountain bike sizing uses a completely different formula

Road and hybrid frame sizes are traditionally measured in centimetres along the seat tube, so their formulas (inseam × 0.665 for road, × 0.685 for hybrid) output centimetres directly. Mountain bikes are conventionally sized in inches, and modern MTB geometry favors a smaller frame with more standover clearance for technical terrain, so the formula (inseam in cm × 0.226, converted to inches) produces a noticeably smaller number relative to inseam than the road formula would — it isn't just a unit conversion, the underlying proportions are genuinely different between the two styles.

Worked example: Bike Frame Size Calculator

An 81 cm inseam on a road/gravel bike suggests a 53.9 cm frame — a size M. A 32-inch inseam (81.28 cm) on a mountain bike instead suggests an 18.37-inch frame, which also lands in size M — but notice the two calculations aren't comparable numbers (53.9 cm vs. 18.37 inches) despite starting from essentially the same inseam, precisely because road and mountain geometry are sized on different scales for different reasons.

Why inseam beats height, and why you should still test ride

Standing height correlates only loosely with leg length — two people of the same height can have meaningfully different proportions of torso to leg — while standover clearance and saddle height are driven almost entirely by inseam, which is why the measurement method (a book pressed snugly into the crotch, measured to the floor) matters more than stepping on a bathroom scale-style height chart. Even so, every manufacturer's actual geometry differs enough from any generic formula that this should be treated as a starting size range to test ride, not a final answer — a brand running slightly long or short in its top tube can shift the right size up or down from what any formula suggests.

The letter size is a different set of cutoffs for mountain bikes

Inseam starts at 81 centimetres. Inches are multiplied by 2.54, and the result has to sit strictly between 50 and 110 centimetres or the tool stops. Road and gravel use inseam times 0.665 and call the frame centimetres. Hybrid uses 0.685. Mountain multiplies centimetres by 0.226 to get inches, then converts that back when it also shows centimetres. The letter is not the same boundaries. Mountain sizes step at 15, 16.5, 18.5, and 20.5 inches. Road and hybrid step at 50, 53, 56, and 59 centimetres. An 81 centimetre inseam is a 53.9 centimetre road frame, size M.

Related tools

More: Auto & Travel