Account

What new tool do you want?

Unit Converters

Data Transfer Rate Converter

Convert internet and transfer speeds between Mbps, Gbps, MB/s and more — see what a connection speed means in file terms.

How to use

  1. 1Enter a speed and pick its unit (bits or bytes per second).
  2. 2Pick the target unit.

How it's calculated

Converts through bits per second. 1 byte = 8 bits, so 100 Mbps = 12.5 MB/s.

Frequently asked questions

Is 100 Mbps the same as 100 MB/s?

No. Mbps is megabits per second; MB/s is megabytes per second. Divide Mbps by 8 to get MB/s, so 100 Mbps is 12.5 MB/s.

How long will a 1 GB file take at 100 Mbps?

About 80 seconds in theory (1 GB = 8,000 megabits ÷ 100). Real downloads are slower because of overhead.

Why do ISPs quote speeds in bits?

Network links are measured in bits per second by convention, while files are measured in bytes.

Why networks are measured in bits but files in bytes

Data links transmit one bit at a time down a wire or over the air, so measuring a connection's capacity in bits per second reflects the physical signal itself — a convention set in early telecommunications and never changed. Files, by contrast, are organized in bytes (8-bit groups) because that's the smallest addressable chunk of storage. The two measurement traditions never merged, which is why every ISP plan and router spec is in Mbps or Gbps while every file size and download manager is in MB or GB.

The division by 8 that trips people up

Because a byte is defined as exactly 8 bits, converting between the two unit families is a clean division or multiplication by 8 — but it's easy to forget which direction to go, and the visual similarity between 'Mb' and 'MB' makes the mistake common. A connection advertised as 100 Mbps will never show a browser download progressing at 100 MB/s; the realistic ceiling is 12.5 MB/s before accounting for any overhead.

Worked example: Data Transfer Rate Converter

100 Mbps converts to exactly 12.5 MB/s (100 ÷ 8), and 1 Gbps converts to exactly 1,000 Mbps. Put in practical terms: downloading a 1 GB (gigabyte, 8,000 megabits) file over a 100 Mbps connection takes about 80 seconds in theory — 8,000 ÷ 100. Real-world downloads usually run noticeably slower than that because of protocol overhead, other traffic sharing the connection, and the server's own upload limits, so treat the converted figure as a best-case ceiling, not a guarantee.

It opens on megabits per second into megabytes per second

The base is bits per second, and every byte-based unit is eight times the matching bit unit, using thousands rather than 1,024. So 100 Mbps is exactly 12.5 MB/s, because 100 million bits divided by 8 million is 12.5. One gigabit per second is exactly 1,000 megabits per second. Kilobits, megabits and gigabits step by 1,000, and the byte rows do the same after the factor of eight. The opening value of 1 Mbps is 0.125 MB/s. Bytes per second, kilobytes per second and megabytes per second step by the same thousands after that factor of eight, so 1 MB/s is exactly 1,000 KB/s.

Eight significant digits, and a dash when the box is empty

A result that is not a clean fraction is shown to eight significant digits. The table lists every rate except the unit selected on the left. Swap exchanges the menus without moving the converted figure into the input. If I clear the field or type a word, the result is a dash and the table hides. A comma in 1,000 is stripped so the number still converts. Anything smaller than a millionth, or from a quadrillion up, is written in scientific notation, which is easy to hit if I convert a few bits per second into gigabytes per second.

Related tools

More: Unit Converters