Account

What new tool do you want?

Unit Converters

Speed Converter

Convert km/h, mph, meters per second, knots and feet per second.

How to use

  1. 1Enter a speed and its unit.
  2. 2Choose the unit to convert to.

How it's calculated

Converts through meters per second. 1 km/h = 1/3.6 m/s; 1 mph = 0.44704 m/s; 1 knot = 1,852 m per hour.

Frequently asked questions

How do I convert km/h to mph?

Divide by 1.609344. For example 100 km/h is about 62.14 mph.

What is a knot?

One nautical mile per hour, exactly 1.852 km/h or about 1.151 mph.

How do I turn m/s into km/h?

Multiply by 3.6. 10 m/s is 36 km/h.

The knot is borrowed from geography, not road units

A knot (1 nautical mile per hour) is built on the nautical mile, which is defined as one minute of latitude on the Earth's surface — so a vessel's speed in knots relates directly to how fast it's crossing degrees of latitude, which is exactly what matters for navigation. That's a completely different lineage from mph or km/h, which scale off a human stride (the mile) or a decimal fraction of the Earth's meridian (the original definition behind the metric system) — which is why aviation and marine speeds are quoted in knots while road speeds never are.

Why mph-to-km/h isn't a clean round number

1 mph converts to 0.44704 m/s exactly, because both the mile (1,609.344 m) and the hour (3,600 s) are themselves exact definitions — so every mph-to-km/h conversion carries that precision rather than being a measured approximation. The common shortcut of 'multiply mph by 1.6' is a convenient rounding, not the real factor (1.609344), and the gap compounds at higher speeds: at 100 mph the shortcut is off by about 0.6 km/h, enough to matter in motorsport timing but not on a highway sign.

Worked example: Speed Converter

100 km/h converts to 62.1371192 mph — noticeably more precise than the 'roughly 62' most people round to. Going the other way, 10 m/s is exactly 36 km/h (multiply by 3.6, since there are 3,600 seconds in an hour and 1,000 meters in a kilometer). And 1 knot is exactly 1.852 km/h, which is why a ship cruising at 20 knots is doing about 37 km/h — a figure you won't get by assuming 'knot' and 'mph' are roughly interchangeable, since they differ by about 15%.

The opening conversion is 1 kilometer per hour into miles per hour

That starts from meters per second. One kilometer per hour is exactly 1 divided by 3.6 meters per second, and one mile per hour is exactly 0.44704 meters per second, which is the international mile of 1,609.344 meters divided by 3,600 seconds. One knot is 1,852 meters per hour, and one foot per second is 0.3048 meters per second, the same foot used for length. So 1 km/h comes out a little under 0.62137119 mph at eight significant digits, not the rough 0.62 I use in my head. Feet per second sit on the same meter-per-second base, so a walking pace in ft/s lines up with the mph row without a second conversion.

The table, the swap, and a number with a comma

Under the headline, every other speed on the list is filled in, and the unit I picked on the left is left out of that table so it is not shown twice. The swap button trades the two menus and leaves my typed number alone. If I clear the field or type a word, the result becomes a dash and the table goes away. Pasting 100,0 with a comma is read as 1000, because the comma is removed before the number is interpreted. Negative speeds convert as well, which is just the same factors with a minus sign.

Related tools

More: Unit Converters