Account

What new tool do you want?

Unit Converters

Pressure Converter

Convert psi, bar, kPa, atmospheres, mmHg and inHg — for tires, weather, gauges and science.

How to use

  1. 1Enter a pressure and choose its unit.
  2. 2Choose the unit to convert to.

How it's calculated

Converts through pascals. 1 bar = 100,000 Pa; 1 psi = 6,894.757 Pa; 1 standard atmosphere = 101,325 Pa.

Frequently asked questions

How many psi is 1 bar?

About 14.504 psi. Going the other way, 1 psi is about 0.0689 bar.

What is normal atmospheric pressure?

One standard atmosphere: 101.325 kPa, 1.01325 bar, 14.696 psi or 760 mmHg.

What units do tire gauges use?

US gauges usually read psi; much of Europe uses bar. 32 psi is about 2.2 bar.

A 'standard atmosphere' is a legal definition, not a measurement

101,325 Pa isn't the pressure someone measured on a particular day — it was fixed by international convention (the 1954 General Conference on Weights and Measures) as a reference value representing typical sea-level air pressure. Everything in this converter that touches 'atm' inherits that exactness, which is why 1 atm converts to exactly 101.325 kPa and exactly 760 Torr, with no rounding involved on either side.

Torr and mmHg look identical but aren't quite

It's a common assumption that millimeters of mercury and Torr are the same unit by two names, and they're extremely close, but not identical. Torr is defined cleanly as exactly 1⁄760 of a standard atmosphere (101,325 ÷ 760 Pa). The 'conventional millimeter of mercury' used in this tool (133.322387415 Pa) instead comes from the historical physical definition — the pressure exerted by a column of mercury of a defined density under standard gravity — which happens to differ from the Torr value in the ninth significant digit. In everyday use (tire gauges, barometers, blood pressure) the distinction is invisible; in metrology it matters enough that the two are kept as separate defined units.

What psi on a tire gauge is actually measuring

Tire pressure readings in psi are almost always gauge pressure — the difference above surrounding atmospheric pressure — not absolute pressure. A tire reading '32 psi' actually contains about 32 + 14.7 ≈ 46.7 psi of absolute pressure; the gauge simply zeroes itself against the atmosphere around it. This tool converts the number you read off the gauge as-is, so when comparing a psi reading to a bar spec sheet from a different country, make sure both are quoted the same way (almost always gauge, for tires).

Worked example: Pressure Converter

1 bar converts to 14.5037738 psi, and 1 atm converts to exactly 760 Torr by definition. For the tire scenario in the FAQ: 32 psi converts to about 2.2 bar, which is why a European pump reading '2.2' and a US gauge reading '32' are describing the same tire pressure, not two different settings.

It opens on pounds per square inch into bar

One psi is 6,894.757293168 pascals and one bar is exactly 100,000 pascals, so 1 psi is about 0.068947573 bar at eight significant digits. A millibar is 100 pascals, the same size as a hectopascal, which is why weather reports in hPa and millibar match. An atmosphere is exactly 101,325 pascals. Inches of mercury use 3,386.389 pascals. The table skips psi while that is the unit on the left. Swap keeps the number I typed, a comma is ignored, and a blank field shows a dash rather than converting zero unless I actually type 0.

Related tools

More: Unit Converters