Account

What new tool do you want?

Unit Converters

Force Converter

Convert newtons, kilonewtons, pound-force, kilogram-force and dynes.

How to use

  1. 1Enter a force and its unit.
  2. 2Choose the unit to convert to.

How it's calculated

Converts through newtons. 1 lbf = 4.44822 N; 1 kgf = 9.80665 N (standard gravity).

Frequently asked questions

How many newtons is a kilogram-force?

9.80665 N — the weight of 1 kg under standard gravity.

How many newtons is a pound-force?

About 4.448 newtons, the force of gravity on one pound of mass.

What is a dyne?

A tiny unit from the CGS system: 1 dyne = 0.00001 N.

Why 'force-of-gravity' units need a fixed gravity value to even make sense

Kilogram-force and pound-force both define a unit of force as 'the weight of a given mass under gravity' — but weight genuinely varies with location (slightly less at altitude, slightly more at the poles than the equator), so both units are pinned to a single agreed value, standard gravity (9.80665 m/s², the same constant that shows up across this site's physics tools), rather than whatever gravity happens to be measured locally. That's what makes 1 kgf exactly 9.80665 N everywhere, even though a kilogram's actual weight on a precise scale varies by a fraction of a percent from city to city.

Worked example: Force Converter

1 kilogram-force converts to exactly 9.80665 newtons, and 1 pound-force converts to about 4.448 newtons — both are forces defined by the standard weight of a mass, not newtons measured directly, so the conversion is exact in the gravitational constant used. A dyne, 0.00001 N, comes from an older CGS (centimeter-gram-second) system still occasionally seen in physics literature predating SI standardization, and shows just how much smaller a 'natural' force unit becomes when your base units of length and mass are a centimeter and a gram instead of a meter and a kilogram.

Why engineers avoid kgf and lbf in serious calculations

Mixing a mass-based force unit like kgf into an equation that also uses kilograms as mass risks a subtle but real error — '1 kgf' and '1 kg' look almost interchangeable in casual use, but conflating them in a calculation silently drops a factor of 9.80665 somewhere. That ambiguity is exactly why the newton (defined purely from mass × acceleration, with no reference to any specific gravity value) is the standard SI unit for force in engineering and physics, with kgf and lbf relegated mostly to legacy specifications and everyday intuition.

The page starts at 1 newton going into pound-force

Pound-force is 4.4482216152605 newtons, so 1 newton is a bit under a quarter of a pound-force once eight significant digits are shown. A kilonewton is exactly 1,000 newtons. A kilogram-force is 9.80665 newtons, standard gravity, and a dyne is exactly one hundred-thousandth of a newton. Converting 1 dyne into newtons is 0.00001, still an ordinary decimal. Converting a single dyne into kilonewtons is small enough that the display can switch to scientific notation because the result is under a millionth. One kilogram-force is a little under 2.20462 pound-force, since both are tied to the same standard gravity.

What I see if I clear the box or paste a comma

An empty field or a word turns the result into a dash and hides the comparison table until the input is a real number again. A comma, as in 1,000, is removed first, so the value is one thousand newtons rather than a failed parse. The table lists every force except the unit on the left. Swap exchanges the two menus and leaves the typed number in place, so I am looking at the reverse conversion of that same input, not at the previous answer typed back in. A typed zero stays zero in every force, which is different from a cleared box.

Related tools

More: Unit Converters