Account

What new tool do you want?

Unit Converters

Torque Converter

Convert newton-meters, pound-feet, pound-inches and kilogram-force meters for bolts, engines and tools.

How to use

  1. 1Enter a torque value and its unit.
  2. 2Choose the unit to convert to.

How it's calculated

Converts through N·m. 1 lbf·ft = 1.35582 N·m; 1 kgf·m = 9.80665 N·m.

Frequently asked questions

How do I convert Nm to ft-lbs?

Multiply by 0.73756. 100 N·m ≈ 73.76 lbf·ft.

Is lb-ft the same as ft-lb?

For torque, yes — both mean a pound-force acting at one foot. (ft-lb is also used for energy.)

How many in-lbs are in a ft-lb?

12 lbf·in, because a foot is 12 inches.

Why torque and energy share a unit but aren't the same thing

Newton-meters measure both torque and energy, and pound-feet measure both torque and (less commonly) energy — the two quantities are dimensionally identical, force times distance, but conceptually different. Energy (work) is force applied through a distance something actually moves; torque is force applied at a distance from a pivot, whether or not anything rotates at all. A wrench straining against a seized, immovable bolt generates real torque and transfers zero energy, since nothing moves — which is exactly why engineers write 'lbf·ft' for torque and reserve plain 'ft-lb' for energy, even though the numbers convert identically.

Worked example: Torque Converter

100 N·m converts to about 73.76 lbf·ft — a typical wheel lug nut torque spec on many cars. Going from pound-feet to pound-inches just multiplies by 12, since a foot is 12 inches: 1 lbf·ft is exactly 12 lbf·in, which is why smaller fasteners (spec'd in the gentler lbf·in range) and larger ones (spec'd in lbf·ft) use different units for the same physical quantity depending on how much torque is actually practical to apply.

Why the conversion factor has so many decimal places

1 lbf·ft = 1.3558179483314004 N·m isn't an approximation rounded for convenience — it falls directly out of multiplying two other exact definitions together: the pound-force (4.4482216152605 N) times the foot (0.3048 m). Nothing in that chain involves measurement or rounding, which is why torque wrenches calibrated in one unit and specifications written in another can be converted with complete confidence down to the last decimal place.

Pound-inches are just the foot value split by twelve

The page starts at 1 newton-meter going into pound-feet. Pound-inches use that same pound-foot factor divided by 12, so twelve pound-inches line up with one pound-foot with nothing left over. Kilogram-force meters use standard gravity, 9.80665 newtons each. One newton-meter in pound-feet comes out near 0.73756215 once it is shown to eight significant digits. The table lists the other torque units and skips newton-meters while that is the unit on the left. I checked the reverse by choosing pound-feet first: one pound-foot comes back a little over 1.35582 newton-meters, the same factor the list is built on.

Swapping the menus does not swap the number I typed

I pressed the swap control expecting the converted figure to move into the input. It does not. The two unit menus trade places and the typed number stays put, so the result changes to the reverse conversion of whatever I had entered. That is useful when I want 1 of the other unit, and surprising when I wanted to keep the answer and convert onward. An empty box or a word shows a dash and hides the table. A comma, as in 1,000, is stripped before the number is read, so a pasted value with thousands separators still converts.

Related tools

More: Unit Converters