Account

What new tool do you want?

Science & Engineering

Generator Size Calculator

Work out the generator size you need from the appliances you want to run — running watts plus the largest motor's starting surge.

How to use

  1. 1Enter the number of each appliance you want to power at the same time.
  2. 2The recommended size adds the largest starting surge and a safety margin.

How it's calculated

Required = total running watts + the largest (starting − running) surge, plus a margin (20% by default). Typical appliance watts are estimates — check nameplates.

Frequently asked questions

What's the difference between running and starting watts?

Motors (fridges, pumps, AC) draw 2–3× their running power for a second or two when they start. The generator must handle that surge.

Why add a margin?

Running a generator near 100% continuously shortens its life and leaves no room for surprises.

Can a portable generator power my whole house?

Usually only essentials. Central AC and electric heating typically need a large standby generator and a transfer switch installed by an electrician.

Why only the single largest surge counts, not every motor's surge added up

Motors draw a brief 2–3× power spike only in the instant they start, not continuously — and in practice, a refrigerator and a sump pump essentially never start at the exact same instant, since each cycles on and off independently based on its own thermostat or sensor. So the calculator adds up everything's steady running watts, then adds just the single largest individual starting surge on top — modeling the realistic worst case of 'everything already running, then the biggest motor kicks on,' rather than the unrealistic case of every motor surging in unison.

Worked example: Generator Size Calculator

One refrigerator (700W running, 2,200W starting), one sump pump (1,050W running, 2,150W starting), one TV (250W) and a set of LED lights (100W) add up to 700 + 1,050 + 250 + 100 = 2,100W running. The largest surge is the fridge's 2,200 − 700 = 1,500W (bigger than the sump pump's 2,150 − 1,050 = 1,100W surge), so the required capacity is (2,100 + 1,500) × 1.20 = 4,320W, rounded up to the nearest 500W increment — 4,500W — matching how generators are typically sold in round wattage steps.

Why the safety margin matters beyond just 'extra power'

Running a generator continuously at or near its rated maximum shortens its service life and leaves zero headroom if you've underestimated a load or a nameplate rating is optimistic — the default 20% margin is there specifically so day-to-day operation sits comfortably below the generator's actual ceiling. It's also worth checking appliance nameplates directly rather than relying purely on the calculator's typical wattage estimates, since actual starting surge varies by motor design, compressor type and even ambient temperature.

A second fridge adds running watts, not a second surge

The opening selection is one refrigerator, one sump pump, lights, and a TV, with a 20 percent margin, which is 2,100 running watts, a 1,500 watt surge, and a recommendation of 4,500 watts. Extra copies multiply running watts only. The surge is the single largest start-minus-run figure among appliance types I set above zero, not that figure times how many I own. Two window units still contribute one air-conditioner's surge. Counts are rounded, and a negative or a blank counts as zero. The recommendation is the running total plus that one surge, times one plus the margin, then raised to the next 500 watt step. A result that lands exactly on a 500 watt multiple stays there.

Related tools

More: Science & Engineering