Video & Audio
Audio Equalizer & Bass Booster
Boost bass, cut harshness or make voices clearer with a 10-band graphic equalizer and a bass booster. Hear the changes live, then download as MP3 or WAV. Nothing is uploaded.
How to use
- 1Drop a song, voice recording or video (MP3, WAV, M4A, OGG, FLAC, MP4…).
- 2Press Preview and pick a preset, or drag the ten band sliders; add bass with the bass boost slider. Changes are heard instantly; tick "Hear the original" to compare.
- 3Press Render for download, listen to the result and download it as MP3 or WAV.
How it's calculated
Ten filters at the ISO octave centres (31.5 Hz to 16 kHz): a low shelf, eight peaking filters about one octave wide and a high shelf, then an optional extra low shelf for bass boost and an output gain. The download is rendered by the same Web Audio filters as the preview, then soft-limited at −1 dB if any peak would clip.
Frequently asked questions
Why does a big bass boost sound distorted?
Boosting adds level. A song that already peaks near 0 dB has no room, so the boosted bass clips. Lower the output level by about as much as you boost (the page tells you how much). The download is soft-limited so it never hard-clips, but heavy limiting still squashes the sound.
What do the band numbers mean?
Each slider is centred on a frequency in hertz: 31.5 and 63 are deep bass you feel more than hear, 125–250 is the body of bass and kick drums, 500–2k is the middle where voices and most instruments live, 4k is presence and clarity, and 8k–16k is air and sibilance.
Which preset should I use for speech?
"Voice / podcast" cuts rumble below 125 Hz and lifts 1–4 kHz, where consonants are, so speech is easier to follow on phone speakers. For noisy recordings, try our noise remover first.
Will my phone's speaker play the extra bass?
Mostly not: small speakers can't reproduce much below about 100–150 Hz, so boosting 31.5 and 63 Hz only uses up headroom. Use the "Small speakers" preset or boost 125–250 Hz instead.
Is my audio uploaded?
No. Decoding, the equalizer and the MP3 encoding all run in your browser.
Sources
Example: a bass boost that doesn't clip
A pop song peaks at −0.3 dB. Choosing the Bass boost preset adds up to 6 dB at 31.5 Hz, and with the bass boost slider at +4 dB the lowest band rises about 10 dB. The page then suggests lowering the output level by about 10 dB. With the output at −10 dB the preview stays clean; it sounds quieter at first, but the balance is bassier. Set your player's volume up to compare fairly, or tick "Hear the original" and match the levels by ear.
Cut before you boost
Engineers often reach for cuts first: if vocals sound muddy, cutting 250–500 Hz by 3 dB usually sounds cleaner than boosting 2–4 kHz by 3 dB, because it doesn't add level or harshness. The response curve under the sliders shows the combined effect, including how neighbouring bands overlap.
What the download contains
The result is rendered at the file's sample rate through exactly the same filters you heard. MP3 is encoded at the quality you choose (192 kbps by default); WAV is 16-bit. If the file was a video, only the audio is saved. Use our add-music-to-video tool to put it back on the video.
Related tools
- Volume Booster (Make Audio Louder)
Make quiet audio louder — boost volume by up to +30 dB with a built-in limiter that prevents harsh clipping — then save as MP3 or WAV.
- Audio Speed Changer (Keep Pitch)
Speed up or slow down audio from 0.5× to 2× — keep the original pitch (time-stretch) or change it like a tape — for podcasts, lessons and practice.
- Reverse Audio
Play any audio backwards — reverse songs, voice messages and sound effects — and download the reversed file as MP3 or WAV.
- Add Music to Video
Put a soundtrack on your video — replace the original sound or mix music underneath it, with volume controls and an automatic fade-out.
- Audio Converter & Video to MP3
Convert audio to MP3 or WAV — M4A, OGG, FLAC, WAV, AAC — and extract MP3 audio from MP4, MOV and WebM videos. Batch convert in your browser.
- Audio Cutter & Trimmer (MP3, WAV, M4A)
Cut and trim audio online — drag to select the part you want, add fade in and fade out, and save as MP3 or WAV. Great for ringtones and clips.