Video & Audio
LUFS Loudness Checker (Spotify, Apple Podcasts, EBU R128, ACX)
Measure integrated loudness (LUFS), true peak, loudness range and RMS, and check a song, podcast or audiobook against Spotify, Apple Podcasts, EBU R 128 and ACX requirements. Batch files; nothing is uploaded.
How to use
- 1Drop one or more audio or video files (MP3, WAV, M4A, FLAC, OGG, MP4…). Several files work for checking an album or a set of episodes.
- 2Choose what to check against: Spotify (Normal, Loud or Quiet), Apple Podcasts, EBU R 128 broadcast, or ACX for Audible audiobooks.
- 3Open a file to see every measurement, a loudness graph and what each service would do; download a CSV of all files.
How it's calculated
Loudness follows ITU-R BS.1770: K-weighting, 400 ms blocks with 75% overlap, an absolute gate at −70 LUFS and a relative gate 10 LU below. True peak uses the standard's 4× oversampling filter. Loudness range follows EBU Tech 3342 (3-second short-term values, −20 LU relative gate, 10th to 95th percentile). RMS and the noise floor are plain RMS in dBFS, as ACX measures them.
Frequently asked questions
What is LUFS?
Loudness Units relative to Full Scale: a measure of how loud audio sounds, not just how high its peaks are. It weights frequencies roughly the way hearing does and ignores silence, so a song and a podcast at −14 LUFS sound about equally loud. LUFS and LKFS are the same unit.
What does Spotify do with my song?
Spotify measures each track (or album) and turns playback up or down to −14 LUFS on the Normal setting, −11 on Loud and −19 on Quiet. A track louder than that is simply turned down, so mastering louder doesn't make it louder on Spotify. Quieter tracks are turned up only as far as the peaks leave 1 dB of headroom, except on Loud, which uses a limiter. Spotify's web player and some third-party devices don't normalise.
What about YouTube, Apple Music, Amazon Music and TIDAL?
They also turn loud tracks down, but none of them publishes an official target in its help pages, so this tool doesn't guess one. Spotify's −14 LUFS with true peak at −1 dBTP is a sensible reference for music streaming.
What's the difference between true peak and sample peak?
Sample peak is the largest sample value. The real waveform between samples can go higher, and those 'inter-sample peaks' can clip when the file is converted to MP3 or AAC or played back. True peak estimates them by oversampling 4×. Streaming services and broadcasters set limits in dBTP for that reason.
How is the ACX noise floor measured here?
As the RMS of the quietest half-second in the file (exact digital silence is skipped and reported separately). ACX expects room tone, a short stretch of your recording space's natural quiet, at the start and end of each file, so the quietest half-second is usually that room tone.
Is my audio uploaded?
No. Files are decoded and measured in your browser.
Sources
- Spotify for Artists: Loudness normalization (checked 22 November 2026)
- Apple Podcasts for Creators: Audio requirements (checked 22 November 2026)
- EBU R 128 (version 5, November 2023): Loudness normalisation and permitted maximum level (checked 22 November 2026)
- ACX: Audio submission requirements (checked 22 November 2026)
- ITU-R BS.1770: Algorithms to measure audio programme loudness and true-peak audio level
- EBU Tech 3342: Loudness range
Example: a loud master on Spotify
A rock master measures −7.8 LUFS integrated with true peak at +0.6 dBTP. On Spotify's Normal setting it's turned down by 6.2 dB, so it plays no louder than a −14 LUFS track, just with less dynamic range. Its true peak is also above Spotify's advice of −2 dBTP for masters louder than −14 LUFS, so the lossy encode may distort on loud hits. Lowering the limiter's ceiling to −2 dBTP fixes that without changing how loud it sounds after normalisation.
Example: a podcast episode for Apple Podcasts
An interview measures −19.5 LUFS with true peak at −2.1 dBTP. Apple asks for −16 LKFS ±1 dB, so it needs about 3.5 dB more. Raising it by 3.5 dB would push the true peak to +1.4 dBTP, above Apple's −1 dBFS limit, so the level has to go up through a limiter rather than plain gain. The audio normalizer tool applies the gain with a peak limiter; its limiter works on sample peaks, so set its ceiling to about −1.5 dB to keep the true peak under −1, then check the result here again.
How the measurements were checked
The meter was compared with FFmpeg's EBU R 128 filter on test signals (a steady tone, a 20 LU dynamic noise signal and a mixed signal): integrated loudness and loudness range matched within 0.1 LU. WAV, FLAC, MP3 and Ogg files are decoded at their own sample rate; other formats (such as M4A) are decoded at 48 kHz, and the browser's resampling can move readings by a few tenths of a dB on very bright material.
Related tools
- Audio Normalizer (LUFS Loudness)
Normalize loudness to broadcast and streaming targets — −14 LUFS for Spotify/YouTube, −16 for podcasts, −23 for EBU R128 — measured to the ITU-R BS.1770 standard.
- Podcast RSS Feed Generator
Create a valid podcast RSS feed with Apple Podcasts and Spotify tags — show details, artwork, category and an episode list — ready to host alongside your audio files.
- Podcast Show Notes Generator
Turn your episode details into polished show notes — summary, guest bio, key takeaways, timestamps (chapters) and links — formatted for Spotify, Apple, YouTube descriptions or your blog.
- Add Music to Video
Put a soundtrack on your video — replace the original sound or mix music underneath it, with volume controls and an automatic fade-out.
- Audio Equalizer & Bass Booster
Boost bass, cut harshness or make voices clearer with a 10-band graphic equalizer and a bass booster. Hear the changes live, then download as MP3 or WAV. Nothing is uploaded.
- Audio Speed Changer (Keep Pitch)
Speed up or slow down audio from 0.5× to 2× — keep the original pitch (time-stretch) or change it like a tape — for podcasts, lessons and practice.