Account

What new tool do you want?

Video & Audio

Sound Level Meter (Decibel Meter)

Measure noise levels with your microphone — live decibel reading, peak, average and a history graph — with calibration and noise-exposure guidance.

How to use

  1. 1Press Start and allow microphone access.
  2. 2Hold the device still; read the level, peak and average. Use the calibration offset if you have a reference meter.

How it's calculated

The meter measures the RMS level of the microphone signal in dBFS and adds a calibration offset to estimate dB SPL. Phone and laptop mics vary, so readings are approximate (±5–10 dB) without calibration.

Frequently asked questions

How accurate is it?

Consumer mics and browser processing limit accuracy. Treat readings as estimates unless calibrated against a real sound level meter.

How loud is too loud?

Prolonged exposure above 85 dB(A) can damage hearing; at 100 dB, safe exposure is about 15 minutes per day.

Why does the level change when I talk near it?

Distance matters: sound level drops about 6 dB each time the distance doubles.

A worked example of how the calibration offset actually works

The microphone's raw signal is measured as dBFS (decibels relative to digital full scale — a value that's always 0 or negative, since 0dBFS is the loudest a digital signal can represent before clipping). If the measured signal comes out to -40dBFS, adding the default +100dB calibration offset gives an estimated 60dB SPL — which the reference table identifies as roughly 'normal conversation.' That offset is the entire calibration mechanism: there's no actual acoustic calibration happening, just a single number you can nudge up or down (using a real sound level meter as a reference) until this tool's readings line up with a trusted instrument's readings for your specific device's microphone.

Why the displayed number doesn't jump around as much as the raw signal does

Each animation frame blends the new reading into the displayed value with prev × 0.8 + new × 0.2 rather than replacing it outright — an exponential moving average that gives 80% weight to the previous smoothed value and only 20% to the latest instantaneous measurement. That's a deliberate smoothing filter, applied specifically to the live readout (the Min/Max/Average statistics still track the true, unsmoothed values underneath), because a raw microphone signal has instant-to-instant variation that would make the number flicker distractingly without actually conveying more useful information about the sustained sound level.

Why accuracy without calibration is explicitly capped at about ±10dB

Consumer microphones in phones and laptops aren't built or certified for acoustic measurement — they have automatic gain control, noise suppression, and frequency responses tuned for voice clarity in calls, not flat, accurate sound-pressure capture, and that processing varies significantly between devices. The FAQ's ±5-10dB uncertainty estimate reflects that real hardware limitation, not a weakness in this tool's math — and it's worth internalizing how large that error actually is: a 10dB difference represents a sound that's perceived as roughly twice as loud, so an uncalibrated reading should be treated as a rough zone (like 'around 70, maybe 65-75') rather than a precise measurement you'd cite for a workplace safety report.

The number eases, and 85 turns it red

Calibration starts at 100 decibels and this browser remembers it. The slider runs from 60 to 130. The live number moves most of the way toward each new reading instead of jumping, and it never goes below zero. From 70 it turns amber, and from 85 it turns red, which is the heavy-traffic line marked as a hearing risk with long exposure. The description is the loudest label you have reached, with about 5 decibels of slack, from a whisper at 30 up to a siren at 120. Minimum, maximum, and average keep running until you reset. The trace keeps the recent readings so a short spike is still visible after it passes.

Related tools

More: Video & Audio