Video & Audio
Webcam & Microphone Test
Test your webcam and microphone online — live camera preview, resolution, a mic level meter and quick playback — before your next video call.
How to use
- 1Press Start and allow camera and microphone access.
- 2Check the preview and speak — the level meter should move. Pick another device if you have more than one.
Frequently asked questions
Is my video recorded or uploaded?
No — the preview stays in your browser and nothing is sent anywhere.
My camera shows black — what now?
Close other apps using the camera (Zoom, Teams), check the browser's camera permission and your OS privacy settings.
Why is my mic meter not moving?
Pick the right input device, check it isn't muted in system settings, and allow microphone access for this site.
Why the camera preview is mirrored but a recorded clip wouldn't be
The video preview is flipped horizontally with a CSS transform specifically so it behaves like a mirror — when you move your hand to the right, your reflection on screen also appears to move to your right, matching the intuitive feedback of an actual mirror and matching how video call software like Zoom conventionally previews your own camera. This is purely a display-layer flip for your own preview; the underlying video frames from the camera are never actually altered, which is why the on-screen note explicitly clarifies the preview is mirrored like a call — so you're not confused later if you ever see unmirrored footage from the same camera elsewhere.
A worked example of how the level meter turns raw audio into a 0-100% bar
Every animation frame, the meter computes the RMS (root-mean-square, a standard loudness measure) of the current audio buffer, then multiplies that by 4 and caps it at 1.0 to get the displayed level — the ×4 scaling exists because typical speech RMS values sit well below 1.0 on the raw -1-to-1 audio scale, so without amplification the bar would barely move for normal talking. The peak marker (the thin vertical line) uses a decay formula — each frame it's set to the maximum of the current level and 99.5% of its own previous value — which makes it jump up instantly on a loud moment but fall back slowly afterward, acting as a 'highest level recently' indicator rather than flickering with every syllable.
Why device labels sometimes show as generic 'Camera 1' / 'Microphone 1'
Browsers deliberately withhold real device names (like 'Logitech C920' or 'Blue Yeti') from enumerateDevices() until a site has actually been granted camera or microphone permission — a privacy measure, since device names could otherwise be used to fingerprint a visitor's hardware without ever asking permission. That's why the device dropdowns only populate with real labels after you've started the test once and granted access; before that point, or in a context where permission was denied, generic numbered labels are the browser's own fallback, not a bug in this tool.
The live picture is silent, and the test clip is five seconds of audio
The preview is muted on purpose. If the microphone played back through your speakers while the test was running, it would howl. Hearing yourself means pressing Record 5-second test. That clip is audio only, the camera picture is left out, and it lasts 5 seconds. Starting another one replaces the previous clip, so only one test stays playable. The line under the picture shows the camera's width and height, and the frame rate rounded to a whole number of frames per second when the browser reports one. Picking a different camera or microphone stops the current preview and starts again on the device you chose. If that device is gone, you get the same kind of message as a failed first start.
The bar turns red past 85%, and the caption follows the peak
Bar color follows the live level. Above 85% it turns red, above 50% it turns amber, and below that it stays green. The sentence under the bar follows the peak mark, the thin line that falls slowly, not the live level. Under 2% it says no sound was detected and suggests you speak or check the mic. Over 90% it says the input is very loud and to lower the volume so it does not distort. In between it says the mic is picking up sound. If the devices will not start, a blocked permission tells you to allow access in the site settings, no device says none was found, and a busy camera names Zoom and Teams. Camera and microphone menus appear only when you have more than one.
Related tools
- Sound Level Meter (Decibel Meter)
Measure noise levels with your microphone — live decibel reading, peak, average and a history graph — with calibration and noise-exposure guidance.
- Online Voice Recorder
Record your voice or any microphone in the browser — pause, play back and download the recording. No sign-up and nothing is uploaded.
- Online Tuner (Guitar, Ukulele, Bass, Chromatic)
Tune your guitar, ukulele, bass or any instrument with your microphone — see the note, the frequency and how many cents sharp or flat you are.
- Online Screen Recorder
Record your screen, a window or a browser tab — with optional microphone — right in your browser, then download the video. No install, no watermark.
- Audio Spectrum Analyzer & Spectrogram
See sound frequencies live from your microphone — real-time spectrum bars and a scrolling spectrogram, with the loudest frequency and note shown.
- English Level Test (CEFR A1–C2)
Find your English level in about 10 minutes — 30 grammar and vocabulary questions from beginner (A1) to proficient (C2), with your CEFR level and explanations for every answer.