Account

What new tool do you want?

Video & Audio

Tap Tempo BPM Counter

Find the BPM of any song by tapping along — tap a key or the button on each beat to see beats per minute instantly, plus delay times in milliseconds.

How to use

  1. 1Play the song and tap the button (or any key) on each beat.
  2. 2After a few taps the BPM settles. It resets after 2 seconds without a tap.

How it's calculated

BPM = 60,000 ÷ the average milliseconds between taps. Quarter-note delay (ms) = 60,000 ÷ BPM.

Frequently asked questions

How many taps do I need?

About 8–16 taps gives a stable reading.

Why does the BPM jump around?

Uneven tapping — keep tapping and it averages out.

What are the delay times for?

Producers set echo/delay effects to the song's tempo using these millisecond values.

A worked example of the delay-time table

At 120 BPM, a quarter note (one beat) lasts 60,000 ÷ 120 = 500 milliseconds — the table's base unit. Every other row is a multiple of that: an eighth note is 500 × 0.5 = 250ms, and an eighth-note triplet is 500 × (1/3) ≈ 166.7ms. A producer dialing in a delay effect would set the delay pedal or plugin to exactly one of these numbers — a 250ms slapback delay synced precisely to the eighth note, for instance — which is why the table exists in milliseconds rather than just showing BPM: delay effects are configured in time units, not tempo units, and this does that conversion for every common note subdivision at once.

Why 'steady ✓' uses a statistical measure, not just a tap count

The readiness indicator isn't based on how many times you've tapped — it's the coefficient of variation (the standard deviation of the gaps between taps, divided by their average), checked against a 5% threshold and requiring at least 4 taps. That measures consistency rather than quantity: 20 wildly uneven taps could still show no checkmark, while 5 very evenly-spaced taps would. This is a meaningfully better signal of a trustworthy BPM reading than tap count alone, since the entire point of tap tempo is that human timing is imperfect — a steadiness check tells you when your taps were consistent enough that the averaged result is actually reliable.

Why half-time and double-time are shown alongside the raw number

Tapping along to a song's perceived beat is inherently ambiguous at the octave level — a song that feels like 85 BPM to one listener can feel like a comfortable 170 BPM to another, if they're tapping on the off-beats or feeling the rhythm at twice or half the rate. Rather than forcing a single 'correct' answer, the tool shows the detected BPM plus its half-time and double-time equivalents side by side, since all three describe the exact same underlying tempo from a different counting perspective — genre convention (a ballad is more likely described at the slower number, a dance track at the faster one) is usually what decides which of the three is the 'right' answer to report.

Wait longer than 2 seconds and the next tap starts the count over

A tap that arrives more than 2 seconds after the previous one is a fresh start. The earlier taps are thrown away, and the big number goes back to a dash until you tap again. Nothing is counting down in the background. The reset happens at the moment of that late tap. Only the most recent 32 taps are kept, so a long session averages the latest 31 gaps, not every tap since you opened the page. The tempo is 60,000 divided by the average gap in milliseconds, shown to one decimal place, and Rounded beside it is that figure taken to the nearest whole beat. Holding a key down does not add extra taps. Escape clears the list. Tab, modifier keys, and typing in a text field are ignored.

The right-hand column is how many times a second that delay repeats

Each row is a note length. A whole note is 4 beats, a half note is 2, a quarter note is 1 beat, an eighth is half a beat, a dotted eighth is three quarters of a beat, a triplet eighth is one third of a beat, and a sixteenth is a quarter of a beat. The middle column is that length in milliseconds. The right-hand column is how many of those delays fit into one second. At 120 BPM the quarter note is 500.0 ms and 2.00 per second, the eighth is 250.0 ms and 4.00, the dotted eighth is 375.0 ms and 2.67, and the triplet is 166.7 ms and 6.00. The table appears after two taps, and its title uses the rounded tempo.

Related tools

More: Video & Audio