Video & Audio
Pitch Changer / Key Shifter
Change the pitch or key of a song by semitones without changing its speed — transpose for singing, practice or tuning — then download.
How to use
- 1Add a song and choose how many semitones to shift (−12 to +12).
- 2Preview, then download MP3 or WAV.
Frequently asked questions
How many semitones is one key?
Each semitone is one piano key. +2 moves C to D; +12 is a full octave up.
Does it change the speed?
No — the tempo stays the same while the pitch moves.
Why does it sound slightly phasey?
Pitch shifting stretches and resamples the sound; large shifts (beyond ±5) add artifacts, especially on complex music.
A worked example of why +12 means exactly double the frequency
Pitch and frequency relate exponentially, not linearly: shifting up by n semitones multiplies frequency by 2^(n/12). At +12 semitones (one full octave), that's 2^(12/12) = 2^1 = exactly double — a 220Hz note becomes 440Hz. At +2 semitones (moving C to D), it's 2^(2/12) ≈ 1.122× — a much smaller, subtler shift. This is why the quick-pick buttons jump from ±1 up through ±5 before skipping straight to ±12: the perceptually useful range for practice and key-matching is mostly within a handful of semitones, with the octave as a special, musically meaningful jump at the far end.
Why pitch shifting and simple speed-up aren't the same operation, even though they're related
Playing audio back faster raises its pitch and speeds it up together, as a single side effect of resampling — this tool deliberately decouples them, using a pitch-shifting algorithm that resynthesizes the audio at the new pitch while stretching it back to the original duration (effectively the reverse combination of what a plain speed change does). That's a structurally harder signal-processing problem than either operation alone, which is exactly why it introduces more audible artifacts than a simple time-stretch does, especially as the shift gets larger.
Why complex, dense music breaks down faster than a solo voice does
A large pitch shift works by stretching and resampling overlapping windows of the waveform, and that process handles a single, relatively simple waveform (an isolated voice or a lone instrument) far more cleanly than a dense mix with many simultaneous overlapping frequencies — a full band recording, layered harmonies, cymbals and sustained chords all competing in the same frequency window give the algorithm much more complex material to try to stretch coherently. That's why the FAQ specifically calls out that shifts beyond about ±5 semitones add artifacts 'especially on complex music' — the same shift that sounds nearly clean on a solo vocal can sound noticeably phasey on a full mix.
The default +2 shift briefly slows the audio to about 89%, then speeds it back
The slider starts at +2 semitones. Moving by n semitones multiplies the frequency by 2 to the power of n divided by 12, so +2 is a factor of about 1.122. To keep the song the same length, the audio is first slowed to about 0.891 times its speed — longer, and temporarily lower — and then sped back up by that 1.122 factor, which raises the pitch and restores the original duration. Anything left over past the original ending is trimmed off. At +12 the factor is exactly 2: slowed to half speed, then sped back up by 2. At −12 the factor is one half: sped to double, then slowed back. Left and right stay separate, so a stereo file stays stereo.
Zero semitones leaves the file alone, and every other shift works in 40 ms pieces
Set the slider to exactly 0 and the audio is handed back unchanged. It is not stretched, windowed, or trimmed. The range is −12 to +12. The shortcut buttons are −5, −3, −2, −1, +1, +2, +3, +5, and +12, so 0 and −12 exist only on the slider. Any other setting works in pieces of 40 milliseconds, at the 44,100 Hz rate files are read at, stepping forward 20 milliseconds at a time and looking about 12 milliseconds either side of the ideal spot for the splice that matches best. A change so small it is already within about a tenth of a percent of the original speed is also left as a plain copy, rather than being pushed through that search.
Related tools
- Audio Speed Changer (Keep Pitch)
Speed up or slow down audio from 0.5× to 2× — keep the original pitch (time-stretch) or change it like a tape — for podcasts, lessons and practice.
- Change Video Speed (Slow Motion / Fast Forward)
Speed up or slow down a video from 0.25× to 4× — with audio kept in sync and pitch preserved — for time-lapses and slow motion.
- Add Music to Video
Put a soundtrack on your video — replace the original sound or mix music underneath it, with volume controls and an automatic fade-out.
- Audio Equalizer & Bass Booster
Boost bass, cut harshness or make voices clearer with a 10-band graphic equalizer and a bass booster. Hear the changes live, then download as MP3 or WAV. Nothing is uploaded.
- GIF Editor (Speed, Reverse, Frames)
Change a GIF's speed, reverse it, make it a boomerang, delete or keep frames, set each frame's timing, change how often it loops and resize it, with a live preview. Runs in your browser.
- Change Image DPI (300 DPI for Print)
Set the DPI of JPG and PNG images to 300, 72 or any value — without changing the pixels — for print shops, publishers and application forms.