Video & Audio
Vocal Remover (Karaoke Maker)
Make a karaoke / instrumental track by removing center-panned vocals from stereo songs — with the bass kept — right in your browser.
How to use
- 1Add a stereo song.
- 2Adjust 'Keep bass below' if the low end sounds thin, preview, then download.
How it's calculated
Vocals are usually mixed in the center (identical in both channels). Subtracting left and right cancels them; the center's low frequencies are added back so bass and kick drum remain.
Frequently asked questions
Why are some vocals still audible?
Reverb and backing vocals are often mixed in stereo, so they don't cancel. AI stem separation gives cleaner results.
Why does it need stereo?
The trick relies on comparing left and right channels; mono files have nothing to cancel.
Can I get just the vocals?
This method isolates the instrumental only. Extracting vocals needs AI source separation.
The actual math behind why this works at all
If a vocal is mixed dead-center, it's recorded as an identical signal V in both the left and right channels: left = V + (left-panned instruments), right = V + (right-panned instruments). Subtracting right from left algebraically cancels V completely, leaving only the instruments that were panned differently between the two channels — no AI, no frequency filtering trickery, just channel subtraction exploiting how the mix was originally built. This is a decades-old technique precisely because it needs nothing more sophisticated than that subtraction to work on a genuinely center-panned vocal.
Why bass and kick drum would disappear too without the 'keep bass below' control
The same cancellation that removes center-panned vocals also cancels anything else mixed dead-center — and bass and kick drum are very commonly mixed center too, for the practical reason that panning low frequencies off-center makes a mix sound unbalanced on mono playback systems. Left unchecked, straight L-R subtraction would gut the low end along with the vocal. The 'Keep bass below' control fixes this by taking the original centered signal — not the subtracted difference — specifically below the chosen frequency (150Hz by default) and adding it back into the result, restoring the kick and bass while leaving everything above that cutoff (where the vocal mostly lives) fully cancelled.
Why this can't touch reverb, harmonies, or truly isolate vocals
The entire technique depends on one specific mixing assumption: that the target sound is identical in both channels. Reverb tails and backing harmonies are frequently recorded or processed in actual stereo — slightly different in the left and right channels by design, to create width and depth — which means they simply don't share the left/right correspondence that center-panned cancellation needs to work, and they survive the subtraction largely intact. This is also exactly why a mono file is a non-starter here: with only one channel, there's no second channel to subtract against, so the entire mechanism has nothing to cancel. Genuinely isolating clean vocals (the opposite direction) requires a fundamentally different approach — a trained audio-separation model, not channel arithmetic.
Keep bass below at 0 Hz takes the kick and the bass out with the vocal
Keep bass below runs from 0 to 400 Hz in steps of 10, and 0 means off, not a very low cutoff. At any other setting, the centered part of the song below that frequency is mixed back in through a steep low-pass, so the bass and the kick return while the vocal, which lives higher up, stays cancelled. The slider opens at 150 Hz. At 0 nothing from the center is added back, so a centered kick and bass disappear along with the vocal. On a mono file the slider is hidden and you see the warning that vocal removal needs a stereo song. There is no setting that builds a second channel out of a mono recording.
A guitar panned to one side stays on that side
Once the centered vocal is cancelled, the stereo width is put back, so an instrument that was on the left stays on the left. The right side is the mirror of that difference, which is what keeps the original placement instead of collapsing everything that survived into the middle along with the bass you chose to keep. A mono file never gets that far. You see This file is mono — vocal removal needs a stereo song. If an export is still attempted, it stops with Vocal removal needs a stereo file. Nothing here invents a second channel from a one-channel recording, so there is no left and right to compare.
Related tools
- Song Key Detector (Key & Camelot Finder)
Find the musical key of any song or audio file — major or minor, relative key and Camelot code for harmonic DJ mixing — analyzed privately in your browser.
- Reverse Audio
Play any audio backwards — reverse songs, voice messages and sound effects — and download the reversed file as MP3 or WAV.
- Add Music to Video
Put a soundtrack on your video — replace the original sound or mix music underneath it, with volume controls and an automatic fade-out.
- Audio Converter & Video to MP3
Convert audio to MP3 or WAV — M4A, OGG, FLAC, WAV, AAC — and extract MP3 audio from MP4, MOV and WebM videos. Batch convert in your browser.
- Delete PDF Pages
Click the pages you don't want and download the PDF without them. Everything stays on your device.
- PDF Attachments Manager
See every file attached inside a PDF (spreadsheets, XML invoices, drawings, emails), save them one by one or as a zip, remove the ones you don't want and attach new files.