Account

What new tool do you want?

Science & Engineering

Capacitor & Inductor Calculator

Calculate capacitive and inductive reactance at a frequency, the LC resonant frequency, and total capacitance or inductance in series and parallel.

How to use

  1. 1Choose a calculation.
  2. 2Enter component values (µF, mH) and frequency where needed; list several values separated by commas for series/parallel.

How it's calculated

Xc = 1 ÷ (2πfC). Xl = 2πfL. Resonance f₀ = 1 ÷ (2π√(LC)). Capacitors add in parallel; inductors add in series; the opposite combinations add as reciprocals.

Frequently asked questions

Why do capacitors combine opposite to resistors?

Parallel capacitors effectively increase plate area, so capacitance adds. In series, the charge path is longer, so reciprocals add.

What happens at resonance?

Xc equals Xl and they cancel, so an LC circuit's impedance is minimal (series) or maximal (parallel) at f₀.

What units should I use?

Capacitance in microfarads (µF), inductance in millihenries (mH), frequency in hertz.

Why capacitors and inductors combine backwards from resistors

Putting two capacitors in parallel effectively increases the total plate area available to store charge, so their capacitance adds directly — the same way two resistors in parallel let more current through, except here it's capacitance, not conductance, that's additive. Two capacitors in series instead stack the physical gap the electric field has to cross, which reduces total capacitance, so series capacitors combine as reciprocals — the opposite rule from resistors. Inductors follow resistor-like rules instead: they add directly in series and as reciprocals in parallel, because inductance opposes change in current in a way that scales with series connection the same way resistance does.

A worked example of how differently they behave by frequency

At 60 Hz (US mains frequency), a 10 µF capacitor has a reactance of 1 ÷ (2π × 60 × 10×10⁻⁶) ≈ 265.26 Ω, while a 10 mH inductor has a reactance of 2π × 60 × 10×10⁻³ ≈ 3.77 Ω — roughly 70 times smaller, from components with 'the same' round numeric value. That huge gap is exactly why capacitors look almost like an open circuit and inductors look almost like a short circuit at low frequency, and why the two behaviors trade places entirely as frequency rises — capacitive reactance falls with frequency while inductive reactance rises with it.

Why resonance is the one frequency where they cancel out

Because capacitive reactance falls and inductive reactance rises with frequency, there's exactly one frequency where an LC pair's reactances become equal and cancel — the resonant frequency, f₀ = 1 ÷ (2π√(LC)). At that specific frequency a series LC circuit's impedance drops to its minimum (letting that frequency through almost unimpeded) while a parallel LC circuit's impedance rises to its maximum (blocking that frequency) — the basis for how radio tuners and frequency filters select one signal out of many.

Series and parallel swap when I switch components

Reactance mode opens at 10 microfarads, 10 millihenries, and 60 hertz, about 265 ohms capacitive and 3.77 ohms inductive. Frequency has to be greater than zero or that mode stops. Resonance hides the frequency box and reports one frequency, using capacitance converted from microfarads and inductance from millihenries. The combination modes replace those boxes with a list that starts as 10, 22, 47, split on commas, spaces, or semicolons. I need at least two positive numbers. For capacitors, series is the reciprocal sum and parallel is the plain sum. For inductors those two labels swap. Two 10 microfarad capacitors are 5 in series and 20 in parallel, which is the check I use before trusting a longer list.

Related tools

More: Science & Engineering