Account

What new tool do you want?

Science & Engineering

Heat Index & Wind Chill Calculator

Find the 'feels like' temperature: heat index from temperature and humidity, or wind chill from temperature and wind speed, using the US National Weather Service formulas.

How to use

  1. 1Choose heat index or wind chill and your units.
  2. 2Enter the air temperature and humidity (or wind speed).

How it's calculated

Heat index: NWS Rothfusz regression (with adjustments) for 80 °F and above. Wind chill (NWS 2001): 35.74 + 0.6215T − 35.75V^0.16 + 0.4275TV^0.16, valid at or below 50 °F with wind over 3 mph.

Frequently asked questions

When is heat index dangerous?

NWS categories: 80–90 °F caution, 90–103 °F extreme caution, 103–124 °F danger, 125 °F+ extreme danger — heat illness becomes likely.

When does frostbite become a risk?

At wind chills around −18 °F (−28 °C), exposed skin can freeze in about 30 minutes; colder values shorten that a lot.

Is heat index measured in shade?

Yes — direct sunshine can add up to about 15 °F (8 °C) to the heat index.

Sources

A worked example: why 95°F feels far hotter than it reads

At 95°F with 70% relative humidity, the Rothfusz regression this tool uses gives a heat index of about 123°F — just inside the NWS 'Danger' band (103-124°F), where heat stroke becomes likely with continued exposure. The gap between the actual 95°F and the felt 123°F is almost entirely humidity: sweat is the body's main cooling mechanism, and it works by evaporation, which slows sharply as the surrounding air approaches its moisture capacity. At 90% humidity and the same 95°F, there's barely any evaporative cooling left, which is why the heat index rises so steeply once humidity passes roughly 60-70% at high temperatures.

Why heat index and wind chill use completely different formulas

Heat index models how humidity blocks evaporative cooling, a heat-transfer effect that only exists above about 80°F in this formula's design range. Wind chill instead models convective heat loss — how fast moving air strips heat from exposed skin — which is why its NWS 2001 formula (35.74 + 0.6215T − 35.75V^0.16 + 0.4275TV^0.16) only applies at or below 50°F with wind over 3 mph; below that wind speed there isn't enough airflow for the convective effect to matter, and the formula isn't defined. At 0°F with 20 mph wind, this gives a wind chill of about −22°F, cold enough that the NWS classifies frostbite risk on exposed skin as possible within roughly 30 minutes.

Why the wind speed exponent is 0.16, not linear

Both terms in the wind chill formula use V^0.16 rather than V itself, reflecting that heat loss from moving air doesn't scale proportionally with speed — most of the cooling effect from wind happens at the first few mph as still air near the skin is swept away, and further increases in speed add progressively less. That's why going from 5 mph to 10 mph wind drops the wind chill noticeably, but going from 30 mph to 35 mph barely changes it at all, even though both represent the same 5 mph increase.

Below 80 °F the heat index uses the short formula

Heat index opens at 90 °F and 60 percent humidity, and the worked chart value near 100 °F is the full regression. If the average of the air temperature and a simpler estimate is under 80 °F, that simpler estimate is what I get instead, and the long regression is skipped. Humidity must sit between 0 and 100 percent. Two extra adjustments apply only inside narrow bands: very dry air, under 13 percent, between 80 and 112 °F pulls the index down, and very muggy air, over 85 percent, between 80 and 87 °F pushes it up. Wind chill refuses the sum above 50 °F or at 3 miles an hour or less. In metric mode the wind is converted from kilometres per hour before that test.

Related tools

More: Science & Engineering