Account

What new tool do you want?

Science & Engineering

pH Calculator

Calculate pH, pOH, [H⁺] and [OH⁻] from any one of them — or the pH of a weak acid from its concentration and Ka.

How to use

  1. 1Choose what you know: pH, pOH, [H⁺], [OH⁻] or a weak acid.
  2. 2Enter the value (concentrations in mol/L).

How it's calculated

pH = −log₁₀[H⁺]; pOH = −log₁₀[OH⁻]; pH + pOH = 14 at 25 °C. Weak acid: [H⁺] = (−Ka + √(Ka² + 4Ka·C)) ÷ 2.

Frequently asked questions

What pH is neutral?

7 at 25 °C. Below 7 is acidic; above 7 is basic (alkaline).

Why is the pH scale logarithmic?

Each unit is a factor of 10 in [H⁺] — pH 3 is ten times more acidic than pH 4.

Does temperature matter?

Yes — the ion product of water changes with temperature, so neutral pH is about 6.14 at 100 °C. These results assume 25 °C.

Why pH 3 isn't just 'a bit more acidic' than pH 4

pH is a negative log₁₀ scale, so [H⁺] = 10⁻ᵖᴴ: a 0.001 mol/L (10⁻³ M) solution of H⁺ gives pH 3 exactly, as in the tool's own example. Each whole pH unit is a tenfold change in hydrogen ion concentration — pH 3 has ten times the [H⁺] of pH 4, and a hundred times that of pH 5. That's why half-strength vinegar doesn't move the pH by half a unit, and why pH differences that look small on paper (say, ocean water drifting from pH 8.2 to 8.0) represent a roughly 60% jump in [H⁺].

Why the weak acid formula needs the quadratic

A strong acid like HCl dissociates essentially completely, so [H⁺] ≈ the acid's concentration. A weak acid like acetic acid (Ka ≈ 1.8×10⁻⁵) only partially dissociates, governed by the equilibrium Ka = [H⁺][A⁻]/[HA]. Solving that equilibrium for [H⁺] from the starting concentration C requires the quadratic formula — [H⁺] = (−Ka + √(Ka² + 4KaC)) / 2 — rather than just assuming [H⁺] = C. For 0.1 M acetic acid this gives pH ≈ 2.87, noticeably higher (less acidic) than the pH 1 you'd get by wrongly treating it as fully dissociated.

Why pH + pOH = 14 only holds at 25 °C

That relationship comes from water's self-ionization constant, Kw = [H⁺][OH⁻] = 1.0×10⁻¹⁴ at 25 °C, so pH + pOH = 14 is really pKw, not a universal law. Kw itself is temperature-dependent — it roughly doubles for every 10 °C rise — so at 100 °C neutral water actually sits near pH 6.14, not 7, even though [H⁺] still equals [OH⁻] there. This calculator's pH+pOH=14 relationship assumes standard room-temperature conditions.

The label under the pH is a hard split at 7

It opens on hydrogen-ion concentration, default 0.001 moles per litre, which is pH 3 and pOH 11, tagged Acidic. The hint is Acidic below 7, Neutral at exactly 7, and Basic above 7, using the 25 °C assumption already built into pH plus pOH equals 14. Concentrations have to be positive whether I start from H+ or OH−. Weak-acid mode reveals a Ka box that starts at 0.000018, and both the concentration and Ka must be positive or the quadratic is refused. pH and pOH inputs are not checked for being positive, because a pH can be negative for a very strong acid or above 14 for a strong base. The ion concentrations are printed as text with a long decimal, so 0.001 stays recognizable as a power of ten.

Related tools

More: Science & Engineering