Account

What new tool do you want?

Science & Engineering

Rainwater Harvesting Calculator

Estimate how much rainwater you can collect from a roof in a storm, a month or a year — in gallons or litres — and the tank size you'd need.

How to use

  1. 1Enter the roof's footprint area (not the sloped area) and the rainfall.
  2. 2Set the collection efficiency (80% is typical for gutters and first-flush losses).

How it's calculated

Imperial: gallons = area (ft²) × rain (in) × 0.623 × efficiency. Metric: litres = area (m²) × rain (mm) × efficiency.

Frequently asked questions

Why use the footprint, not the roof's real area?

Rain falls vertically, so what matters is the horizontal area the roof covers.

How much water is 1 inch on 1,000 sq ft?

About 623 gallons before losses (~2,360 litres).

Is rainwater collection legal?

Almost everywhere, but a few US states limit volumes or uses. Check local rules and don't drink untreated rainwater.

Why a pitched roof's footprint, not its actual surface area, is what counts

Rain falls straight down, so the amount landing on a roof depends on the horizontal area it shadows from directly overhead — not the larger sloped surface area you'd get measuring along the actual roof pitch. A steeply pitched roof has noticeably more physical surface area than its footprint, but a raindrop falling toward that footprint hits the roof regardless of the angle, so the extra sloped area doesn't collect extra water. That's why the calculator explicitly asks for footprint area (the building's outline as seen from above) rather than the roofer's surface-area measurement.

Worked example: Rainwater Harvesting Calculator

1,000 ft² of roof footprint catching 1 inch of rain at 100% efficiency collects 1,000 × 1 × 0.623 = 623 gallons — the 0.623 conversion factor comes from converting a 1-inch depth over 1 square foot into gallons (a cubic foot holds about 7.48 gallons, and 1 inch is 1/12 of a foot, so 7.48 ÷ 12 ≈ 0.623). In metric units, 100 m² catching 10 mm of rain at 80% efficiency collects 100 × 10 × 0.8 = 800 litres directly, since a millimetre of rain over a square metre is exactly one litre before any efficiency loss — a cleaner relationship than the imperial units, which is why metric rainfall calculations skip the extra conversion constant entirely.

Where the 20% efficiency loss actually goes

The default 80% efficiency accounts for water that never makes it to the tank: the 'first flush' of each rain event (deliberately diverted because it washes dust, pollen and bird droppings off the roof), splashing and overflow at the gutters, and evaporation during light rain. Well-maintained gutters with a first-flush diverter can push collection efficiency higher than 80%, while clogged or undersized gutters can push it noticeably lower — worth adjusting based on the actual condition of a specific roof and gutter system rather than assuming the default always applies.

The result is a whole number, and both unit systems stay on screen

Imperial is selected first: 1,500 square feet, 1 inch of rain, 80 percent efficiency. Gallons are area times rainfall times 0.623 times the efficiency fraction, then shown as a whole number, so a fraction of a gallon is rounded. A second line converts that volume to litres with 3.78541. In metric mode the formula is simply square metres times millimetres times efficiency, because one millimetre on one square metre is one litre, and the other line converts back to US gallons. There is no minimum rainfall and no tank-rounding step. The volume is the collected water, and I compare it with a barrel or cistern myself.

Related tools

More: Science & Engineering