Account

What new tool do you want?

Science & Engineering

Earthquake Magnitude & Energy Calculator

Compare earthquakes by magnitude: the energy released, the TNT equivalent and how many times stronger one quake is than another.

How to use

  1. 1Enter an earthquake's magnitude.
  2. 2Enter a second magnitude to compare the energy and shaking amplitude.

How it's calculated

Energy (joules) ≈ 10^(1.5 M + 4.8) (Gutenberg–Richter). Each whole step in magnitude is about 31.6× more energy and 10× more ground-motion amplitude. 1 ton TNT = 4.184 × 10⁹ J.

Frequently asked questions

Do we still use the Richter scale?

Scientists now use the moment magnitude scale (Mw), which is consistent with Richter for moderate quakes but works better for large ones.

How much stronger is a 7.0 than a 6.0?

About 32 times more energy and 10 times more ground-shaking amplitude.

Does magnitude tell me the damage?

Not by itself — depth, distance, soil and building quality matter. Intensity scales like Modified Mercalli describe local shaking.

Why one whole magnitude step is 32×, not 10×, the energy

The magnitude scale is defined so that ground-motion amplitude grows by a factor of 10 for each whole step — but energy release grows faster than amplitude does, by the 1.5 power, so each step is 10^1.5 ≈ 31.6 times more energy. The two numbers get confused constantly in casual reporting, but they answer different questions: amplitude ratio tells you how much bigger the seismograph wiggle is, energy ratio tells you how much actual destructive power was released.

Worked example: Earthquake Magnitude & Energy Calculator

A magnitude 7.0 earthquake releases about 1.995 × 10^15 joules by the Gutenberg-Richter formula — equivalent to roughly 477 kilotons of TNT, more than 30 times the Hiroshima bomb's yield. Compared to a magnitude 6.0 quake, that's 31.62 times more energy but only 10 times more ground-shaking amplitude — meaning the 7.0 doesn't just shake 10 times harder, it releases enough additional energy to be genuinely catastrophic where a 6.0 might be merely serious.

Why magnitude alone doesn't predict damage

Two quakes of identical magnitude can produce wildly different real-world outcomes depending on depth (a shallow quake shakes the surface harder than a deep one of the same size), distance from population centers, local soil conditions (soft sediment amplifies shaking; bedrock dampens it), and building construction standards. That's why seismologists pair magnitude (a measure of the earthquake's total energy) with separate intensity scales like the Modified Mercalli scale, which describes what people and buildings actually experienced at a specific location.

Clear the second magnitude and the ratios vanish

Magnitude starts at 7.0 and the comparison at 6.0, both in tenths, so I can type 6.7 without the box snapping to a whole number. Energy is shown in scientific notation with three digits after the leading figure, and the TNT line is in kilotons, using 4.184 billion joules per ton and then dividing by 1,000 to reach kilotons. The energy ratio and the shaking-amplitude ratio appear only while the comparison box holds a real number. When I clear it, those two lines go away and I am left with the energy and the TNT equivalent of the first magnitude alone. That is how I check a single quake without a fake comparison sitting in the result.

Amplitude and energy answer different questions

The amplitude ratio is 10 raised to the difference of the two magnitudes, so a gap of 1.0 is always a factor of 10 in ground motion, whether I compare 7 with 6 or 5 with 4. Energy does not follow that same factor. It uses 10 to the power of 1.5 times the magnitude plus 4.8, so the ratio between two quakes depends on that 1.5 slope and comes out near 31.6 for a one-step gap. I keep the two lines apart when I read the result: the amplitude line is about the seismograph wiggle, and the energy line is about how much larger the release is. A half-step gap is not half of 10 or half of 32, because both scales are exponential.

Related tools

More: Science & Engineering