Account

What new tool do you want?

Home & DIY

Board Foot (Lumber) Calculator

Calculate board feet for hardwood and lumber from thickness, width, length and quantity — and the cost at a price per board foot.

How to use

  1. 1Enter the thickness and width (inches) and length (feet).
  2. 2Enter the number of boards and the price per board foot.

How it's calculated

Board feet = thickness (in) × width (in) × length (ft) ÷ 12. One board foot = 144 cubic inches.

Frequently asked questions

Do I use nominal or actual size?

Hardwood is usually sold by rough (nominal) thickness in quarters — 4/4 = 1 in, 8/4 = 2 in. Use the size the seller prices by.

What does 4/4 mean?

Four quarters of an inch, i.e. 1 inch rough thickness. 5/4 is 1¼ in, 8/4 is 2 in.

How is construction lumber sold?

Usually by the piece or linear foot (e.g. a 2×4×8), not by the board foot.

Why board feet exist as their own unit at all

A board foot measures volume (144 cubic inches, the same as a 1×12 in board one foot long) rather than area or linear length, because hardwood is sold and priced by the volume of wood in a board, not by how long or wide it happens to be cut. That's fundamentally different from construction lumber, which is priced by the piece or linear foot regardless of actual volume — which is why the FAQ specifically flags that a 2×4×8 at the home center isn't priced the way a hardwood board at a lumberyard is.

Worked example: Board Foot (Lumber) Calculator

Ten boards, each 1 in thick, 6 in wide and 8 ft long, come to (1 × 6 × 8) ÷ 12 = 4 board feet per board, or 40 board feet total for the batch. At $5 per board foot, that's a $200.00 total cost — and because the price is per board foot rather than per board, doubling the thickness to 2 in (8/4 stock) on the same 10 boards would double the cost to $400 even though you're still buying the same number of physical boards.

Why 'nominal' thickness trips people up

Hardwood thickness is conventionally described in quarters of an inch based on the rough-sawn size before planing — 4/4 means 1 inch rough, 8/4 means 2 inches — but a board's actual finished thickness after milling is typically about 1/8 to 3/16 in less than the nominal figure. Pricing and board-foot calculations are done on the nominal (rough) thickness, not the thinner finished dimension you'll actually measure on a planed board, so using your calipers on a finished board and plugging that number in here will understate the board feet you're actually being charged for.

Where this calculator's simplicity has limits

This gives the board feet in a given stack of uniformly-sized boards, but it doesn't account for grade, figure, or defects that a lumberyard factors into the price per board foot itself — two stacks with identical board-foot totals can have very different prices if one is clear, straight-grained stock and the other has knots and checks. The board-foot math is exact; the price per board foot you multiply it by is where the real variability in hardwood cost comes from.

The per-board line divides the total, and a blank price hides the cost

Board feet are thickness in inches times width in inches times length in feet, divided by 12, then times how many boards, which opens at 10. The per-board figure is that total divided by the quantity, so it matches a single board even when I priced a stack. A price per board foot shows a cost only when it is above zero. The field starts empty, so the cost line is absent until I type one. There is no nominal-versus-actual switch. A 1 inch thickness is used as 1 inch, even if the lumber was sold as a nominal inch that dresses thinner. Quantity scales the total and leaves the per-board figure alone. Currency, if a price is present, changes the cost symbol and not the board-foot count.

Related tools

More: Home & DIY