Account

What new tool do you want?

Home & DIY

Paint Calculator

Estimate how much paint you need for a room's walls (and ceiling) in gallons or litres, allowing for doors, windows and the number of coats.

How to use

  1. 1Enter the room's length, width and wall height.
  2. 2Enter the number of doors and windows and the coats you'll apply.

How it's calculated

Wall area = 2 × (length + width) × height − 21 ft² per door − 15 ft² per window. Paint = area × coats ÷ coverage (about 350–400 ft² per gallon, or 10 m² per litre).

Frequently asked questions

How many coats do I need?

Usually two. One may do when repainting a similar colour with good paint; dark-to-light changes can need a primer plus two coats.

How much does a gallon cover?

About 350–400 sq ft on smooth, primed walls — less on textured or porous surfaces.

Should I buy extra?

Keep a little for touch-ups; buying all the paint at once also avoids colour differences between batches.

Why the 'buy' output jumps to whole gallons

The raw gallons figure is a continuous number — 2.09 gallons, say — but paint isn't sold that way. Below a quarter-gallon the tool suggests buying a quart instead of a whole gallon can; above that, it rounds up to the next full gallon, since cans are the only practical unit and most stores don't sell precise fractional measures. That rounding is deliberately generous rather than exact, because running short mid-wall and needing a second, possibly slightly different-batch can of paint is a worse outcome than having a half-can left over.

Door and window deductions are averages, not your actual openings

The formula subtracts a flat 21 ft² per door and 15 ft² per window from the gross wall area — figures based on a standard 3×7 ft door and a typical 3×5 ft window. A set of French doors, a picture window, or a tiny bathroom window will be meaningfully larger or smaller than those averages, and if your room has several non-standard openings, the paintable area (and therefore the gallons needed) will be off by a noticeable amount. For a room with unusual openings, it's more accurate to measure their total area yourself and adjust the door/window counts to make the subtraction match.

Worked example: Paint Calculator

A 14×12 ft room with 8 ft ceilings, one standard door and two windows, painted with two coats, has a gross wall area of 2 × (14+12) × 8 = 416 ft², minus 21 for the door and 30 for the two windows, leaving 365 ft² of paintable wall. At two coats and 350 ft² of coverage per gallon, that's (365 × 2) ÷ 350 ≈ 2.09 gallons — which this tool rounds up to a practical '3 gallons' to buy, leaving a can spare for touch-ups.

A quarter gallon or less tells me to buy a quart

Paintable area starts from the four walls, then subtracts 21 square feet for each door and 15 for each window, which are fixed averages. The ceiling is off until I turn it on, and then the floor rectangle is added. Coats open at two, and coverage opens at 350 square feet per gallon. The paint-needed line is the exact gallons, to two decimals. The buy line is different: at a quarter gallon or below it says one quart, and above that it rounds up to whole gallons. Litres are the exact gallons times about 3.785, not the rounded buy amount. An area that falls to zero or below, or a coverage of zero, is rejected.

Related tools

More: Home & DIY