Account

What new tool do you want?

Home & DIY

Electricity Cost Calculator

Find out how much an appliance costs to run per day, month and year from its wattage, hours of use and your electricity rate.

How to use

  1. 1Enter the appliance's power in watts and how many hours a day it runs.
  2. 2Enter your price per kWh from your electricity bill.

How it's calculated

kWh per day = watts × hours ÷ 1000 × quantity. Cost = kWh × price per kWh. A month is taken as 30.42 days (365 ÷ 12).

Frequently asked questions

Where do I find an appliance's wattage?

On the rating label or in the manual. For devices listed in amps, multiply amps by your voltage (120 V in the US, 230 V in the UK/EU).

Why is my fridge's cost lower in real life?

Fridges, air conditioners and heaters cycle on and off, so they draw full power only part of the time. Use a plug-in energy meter for exact figures.

What's a typical electricity price?

Roughly $0.15–0.30 per kWh in the US and €0.20–0.40 in much of Europe, but check your own bill — rates vary a lot.

Why the fridge and AC numbers run high

This calculator assumes the appliance draws its rated wattage for every hour you enter, which is accurate for things with a constant draw — a space heater, a lamp, a desktop PC under load. It overstates reality for anything with a thermostat or compressor cycle, like a fridge, window AC unit or electric water heater, because those only pull full power while actively cooling or heating and then idle. A fridge rated at 150 W doesn't draw 150 W continuously for 24 hours; it might run 30-40% of the time. For cycling appliances, the number this tool gives is a ceiling, not the real bill — a plug-in watt-meter that logs actual kWh over a day is the only way to get an exact figure.

Where the 'per month' figure comes from

The month output isn't 30 days or calendar-days-in-this-month — it's 365 ÷ 12 (30.42 days), the standard way to annualize a daily rate without the months-with-31-days drift. That matters if you're trying to reconcile this tool's monthly estimate against an actual utility bill covering, say, 28 or 31 days: multiply the day figure by your bill's actual day count instead for an apples-to-apples comparison.

Reading wattage off amps

Plenty of labels list amps instead of watts, especially on motors and older appliances. Multiply amps by your mains voltage — 120 V in the US/Canada, 230 V across the UK/EU/Australia — to get watts before entering it here. Getting the voltage wrong by using the other region's figure is a common way to be off by nearly 2x.

Worked example: Electricity Cost Calculator

A 1,500 W space heater run 3 hours a day at $0.17 per kWh uses 1500 × 3 ÷ 1000 = 4.5 kWh daily. At $0.17/kWh that's $0.765 a day, or $279.23 over a full year (4.5 kWh × 365 × $0.17) — the kind of number that explains why running a space heater all winter instead of fixing a drafty window adds up fast.

The month is a twelfth of a year, and hours cannot pass 24

Daily energy is watts times hours times the quantity, divided by 1,000 to get kilowatt-hours. Quantity opens at 1 and will not go below 1. Hours have to sit from 0 through 24, or I am stopped, so a device I imagine running 25 hours a day is rejected rather than wrapped. The monthly cost and the monthly energy multiply the daily figure by 365 divided by 12, not by 30 or 31, so every month is the same length here. The yearly cost is the daily cost times 365. The rate is per kilowatt-hour and opens at 0.17. A quantity above 1 scales both the energy and the cost, which is how I price two identical heaters without adding the watts myself. Currency only changes the money symbol.

Related tools

More: Home & DIY