Home & DIY
Pool Chlorine & Chemical Calculator
Work out how much chlorine (liquid, cal-hypo or trichlor) raises free chlorine by a target amount, and how much shock you need for your pool's volume.
How to use
- 1Enter the pool volume in gallons and the current and target free chlorine (ppm).
- 2Choose the chlorine product you're using.
How it's calculated
Per 10,000 gal, to raise free chlorine by 1 ppm: 12.5% liquid chlorine ≈ 10.7 fl oz; 10% ≈ 13 fl oz; 73% cal-hypo ≈ 1.8 oz (by weight); 65% cal-hypo ≈ 2 oz; 90% trichlor ≈ 1.5 oz. Dose scales with gallons and ppm change.
Frequently asked questions
What free chlorine level should a pool have?
About 1–3 ppm for most residential pools (CDC recommends at least 1 ppm), higher with stabilizer (CYA) — a common guide is FC ≈ 7.5% of CYA.
How much should I shock?
Shocking usually means raising FC to about 10 ppm (or 40% of CYA for algae) — use the target field.
Is it safe to add chemicals directly?
Follow the product label. Never mix different chlorine products together, and add chemicals to water, not water to chemicals.
Why the dose scales with both volume and ppm change
The amount needed is proportional to two separate things: how much water you have (gallons ÷ 10,000) and how far you need to move free chlorine (target − current). Doubling either one doubles the dose. This is why the tool requires target to be strictly higher than current — the math only makes sense as an addition calculation; it isn't built to tell you how to lower chlorine (that's done by diluting with fresh water or waiting for sunlight to burn it off, not by adding a chemical).
Free chlorine isn't the whole chemistry picture
This calculator only handles free chlorine (FC), one of several numbers that matter for a safe, clear pool — it doesn't touch pH, alkalinity or cyanuric acid (CYA, the stabilizer that protects chlorine from sunlight). In practice the right FC target depends on your CYA level: a common guideline is keeping FC at roughly 7.5% of your CYA reading, so a pool with high stabilizer needs a higher FC target than the calculator's generic 1-3 ppm range suggests. Test CYA separately before deciding your target.
Never mix chlorine products together
The product dropdown lets you pick one chlorine source at a time deliberately — liquid chlorine, cal-hypo and trichlor have very different pH effects and, more importantly, some combinations (particularly concentrated chlorine products mixed directly with each other or with acids) can react violently. Always add chemicals to water, never water to chemicals, and dose one product fully before switching to a different one in the same pool.
Worked example: Pool Chlorine & Chemical Calculator
A 10,000-gallon pool sitting at 1 ppm free chlorine that needs to reach 3 ppm has a rise of 2 ppm. Using 12.5% liquid chlorine at the tool's rate of 10.7 fl oz per 10,000 gallons per 1 ppm: 10.7 × 2 × (10,000 ÷ 10,000) = 21.4 fl oz, which is about 0.17 gallons — roughly a cup and a half of liquid chlorine poured around the pool's perimeter.
The dose will not run if the target is not above the current reading
The amount is a product rate times how many ppm I still need times the gallons divided by 10,000. If the target is not higher than the current reading, I am stopped, so a pool that is already at the target does not get a zero-dose line. Liquid chlorine, which is what opens, is shown in fluid ounces, and a second line divides that by 128 to show gallons. A powder product is shown in ounces and the second line divides by 16 to show pounds. The product menu changes the rate and which of those two conversions I see. Gallons open at 15,000 and the reading opens at 1 ppm heading toward 3. A larger pool scales the dose in a straight line.
Related tools
- Pool & Hot Tub Heating Cost Calculator
Estimate the energy and cost to heat a pool or hot tub by a number of degrees with a gas heater, electric heater or heat pump.
- Grass Seed & Fertilizer Calculator
Work out how much grass seed or fertilizer your lawn needs from its area — for new lawns or overseeding — and how much nitrogen a fertilizer bag supplies.
- Water Usage & Bill Calculator
Estimate household water use from showers, toilet flushes, laundry and dishwashing — and the monthly cost at your water and sewer rates.
- Roof Snow Load Calculator
Estimate the weight of snow on a roof from depth and snow type — pounds per square foot and total load — and compare it with the roof's design load.
- Printing Cost Calculator (Ink & Paper)
Work out what printing really costs per page and per job — ink or toner, paper and double-sided savings — for home and office printers.
- Savings Goal Calculator
Work out how much to save each month to reach a goal by a target date — for a house deposit, car, wedding, trip or any sinking fund.