Account

What new tool do you want?

Home & DIY

Drywall & Wallpaper Calculator

Estimate drywall sheets and screws for a room's walls and ceiling — or rolls of wallpaper — allowing for doors, windows and waste.

How to use

  1. 1Enter the room size and ceiling height, and the number of doors and windows.
  2. 2Choose drywall or wallpaper and the sheet or roll size.

How it's calculated

Wall area = perimeter × height − openings (21 ft² per door, 15 ft² per window). Drywall sheets = area × (1 + waste) ÷ sheet area; about 1 screw per ft². Wallpaper rolls = area ÷ usable roll coverage.

Frequently asked questions

4×8 or 4×12 sheets?

4×12 sheets mean fewer seams (less taping) but are heavy and awkward; 4×8 is easier for one person and small rooms.

How much does a roll of wallpaper cover?

A US single roll covers about 27 ft² (about 22 ft² usable after trimming); a European roll (0.53 × 10 m) covers about 5.3 m² (57 ft²).

Why add more for patterned wallpaper?

Matching the pattern repeat wastes paper at each strip — add 10–25% depending on the repeat length.

Why 4×12 sheets don't give a proportionally lower count

Switching the sheet size from 4×8 ft (32 ft² per sheet) to 4×12 ft (48 ft²) doesn't cut your sheet count by a third just because each sheet is 50% bigger — it depends entirely on how the waste-adjusted area divides, and Math.ceil rounds every result up to a whole sheet regardless of size. A room that needs 13 of the smaller sheets might only need 9 of the larger ones rather than a perfectly proportional 8.7. The real-world tradeoff is handling: 4×12 sheets are heavy and awkward for one person to maneuver but cut the number of seams that need taping roughly in half, which is often worth more in labor time saved than the material cost difference.

Same formula, different output for wallpaper

Both materials share the identical wall-area calculation — perimeter × height minus door and window deductions — but wallpaper swaps the sheet-size math for roll coverage, and it skips the ceiling option entirely (the toggle only appears for drywall) since ceiling wallpaper is rare enough not to warrant a field. One thing the calculator can't account for is pattern matching: a patterned roll wastes extra material at every strip to align the repeat, which is why the howTo and FAQ both call out adding 10-25% waste on top of the usable-coverage figure for anything beyond a plain or textured paper.

Worked example: Drywall & Wallpaper Calculator

A 14×12 ft room with 8 ft ceilings, one door and two windows has 365 ft² of wall area (2 × (14+12) × 8, minus 21 for the door and 30 for the windows). With 10% waste and 4×8 ft (32 ft²) drywall sheets, that's ⌈401.5 ÷ 32⌉ = 13 sheets, plus roughly one screw per square foot of area, so about 365 screws. The same room papered instead, at 22 ft² of usable coverage per roll, needs ⌈401.5 ÷ 22⌉ = 19 rolls.

Wallpaper ignores the ceiling toggle, and screws follow the wall area

Drywall is the material that opens. The ceiling toggle only adds the floor rectangle when drywall is selected. Wallpaper leaves the ceiling out even if that toggle is on, and it switches the main count from sheets to rolls using the usable coverage per roll, which opens at 22 square feet. Sheet size opens at 4 by 8, which is 32 square feet, with 4 by 10 and 4 by 12 as the other choices. Sheets are the order, including the 10 percent waste that opens, divided by that sheet area and rounded up. The screw line is about one per square foot of the area before waste, rounded up, so waste adds sheets but not screws.

Related tools

More: Home & DIY