Home & DIY
Pool Volume Calculator (Gallons & Litres)
Calculate how many gallons or litres a pool, hot tub or aquarium holds — rectangular, round or oval, with shallow and deep ends.
How to use
- 1Choose the shape and enter the dimensions in feet (inches for small tanks: enter decimals, e.g. 2.5 ft).
- 2For sloped pools, enter the shallow and deep end depths.
How it's calculated
Average depth = (shallow + deep) ÷ 2. Rectangle: L × W × depth. Round: π × r² × depth. Oval: π × (L ÷ 2) × (W ÷ 2) × depth. Gallons = ft³ × 7.48; litres = ft³ × 28.32.
Frequently asked questions
Why do I need my pool's volume?
Chemical doses, pump sizing and heating costs all depend on the number of gallons.
How full should the pool be?
Usually to the middle of the skimmer opening — measure depth to that water line, not the top of the wall.
How many fish can my aquarium hold?
A cautious rule of thumb is about 1 inch of adult fish per gallon for small fish — less for large or messy species.
Why average depth works for sloped pools
Averaging the shallow and deep end depths — (shallow + deep) ÷ 2 — is exact for a pool whose floor slopes in a straight line from one end to the other, because volume under a linear ramp equals the area times the mean height. Most rectangular in-ground pools are built this way, so the shortcut holds. It breaks down for pools with a flat shallow section, a steep drop, then a flat deep section (a common design for diving areas) — that shape has more water than the simple average predicts, since more of the pool sits at the deeper depth than a straight slope would suggest. For an unusual profile like that, splitting the pool into two separate rectangular sections and running the calculator twice gives a closer number.
Measure to the waterline, not the wall
The depth figures that matter are water depth, not wall height — measure down to where the water actually sits, typically the middle of the skimmer opening, not the top of the coping. Pools are rarely filled to the brim, so using wall height overstates volume, sometimes by a few hundred gallons on a mid-size pool, which then throws off every chemical dose calculated from this number.
Why gallons, not litres, drives US pool chemistry
The gallons figure feeds directly into the companion chlorine and shock calculator, which is dosed in US product measurements (fl oz and lb per 10,000 gallons) because that's how pool chemicals are labeled and sold in the US. If you're in a litres market, convert back from the litres output when buying chemicals labeled in metric units rather than mixing the two unit systems partway through a dosing calculation.
Worked example: Pool Volume Calculator
A rectangular 32 × 16 ft pool with a 3.5 ft shallow end and a 6.5 ft deep end has an average depth of 5 ft, giving 32 × 16 × 5 = 2,560 ft³ of water — which converts to 2,560 × 7.48 ≈ 19,150 US gallons (about 72,500 litres). That's the figure you'd then plug straight into the chlorine calculator to work out a dose.
Related tools
- Pool & Hot Tub Heating Cost Calculator
Estimate the energy and cost to heat a pool or hot tub by a number of degrees with a gas heater, electric heater or heat pump.
- Paint Calculator
Estimate how much paint you need for a room's walls (and ceiling) in gallons or litres, allowing for doors, windows and the number of coats.
- Pool Chlorine & Chemical Calculator
Work out how much chlorine (liquid, cal-hypo or trichlor) raises free chlorine by a target amount, and how much shock you need for your pool's volume.
- Dehumidifier, Air Purifier & Lighting Size Calculator
Size appliances for a room: dehumidifier capacity (pints/day), air purifier CADR for its square footage, and the lumens of light the room needs.
- Water Usage & Bill Calculator
Estimate household water use from showers, toilet flushes, laundry and dishwashing — and the monthly cost at your water and sewer rates.
- Volume Converter
Convert liters, milliliters, US and UK gallons, cups, fluid ounces, cubic feet and more.