Home & DIY
Concrete Calculator (Slabs, Footings & Columns)
Calculate concrete for a slab, footing or round column in cubic yards and cubic metres — and how many 40, 60 or 80 lb bags you need.
How to use
- 1Choose a slab/footing or a round column.
- 2Enter the dimensions (feet and inches) and quantity; add a waste allowance.
How it's calculated
Slab volume = length × width × thickness. Column = π × r² × height. Cubic yards = cubic feet ÷ 27. Bag yields: 80 lb ≈ 0.60 ft³, 60 lb ≈ 0.45 ft³, 40 lb ≈ 0.30 ft³.
Frequently asked questions
How thick should a slab be?
4 inches is standard for patios and walkways; 5–6 inches for driveways and slabs carrying vehicles.
Bags or ready-mix?
Bags suit small jobs. Above about 1 cubic yard (~45 × 80 lb bags), ready-mix delivery is usually cheaper and easier.
How much extra should I order?
5–10% covers spillage, uneven ground and form flex.
Why bags make sense for small jobs but not big ones
A 10×10 ft slab poured 4 in thick comes out to 1.23 cubic yards — but that same number means 56 bags of 80 lb pre-mix, each needing to be opened, mixed with water and poured by hand before the batch starts setting. Ready-mix delivery charges a minimum-load fee regardless of how little concrete you order, so it only pays off once the quantity is large enough to spread that fee thin — commonly cited around 1 cubic yard, or roughly 45 bags. Below that, mixing bags yourself is usually both cheaper and more practical; above it, bags become a lot of heavy, time-pressured labor for a worse finish.
The column formula hides a unit conversion
For a round column or post hole, the diameter field is entered in inches but the formula needs it in feet, which is why the compute logic divides by 24 instead of 2 before squaring — that's dividing by 12 to convert inches to feet, then by 2 to get the radius, folded into one step. A 12 in diameter footing becomes a 0.5 ft radius, and π × 0.5² × height gives the cubic feet. Getting this unit mismatch wrong by hand (using 12 as the radius in feet, for instance) would overestimate volume by roughly 576 times — a sanity-check worth doing if you're ever calculating it manually instead of trusting the tool.
Worked example: Concrete Calculator
That same 10×10 ft, 4 in slab needs 10 × 10 × (4 ÷ 12) = 33.3 ft³ of concrete, which is 33.3 ÷ 27 = 1.23 cubic yards. In bags, that's 1.23 × 27 ÷ 0.6 ≈ 56 bags of 80 lb mix, 74 bags of 60 lb, or 111 bags of 40 lb — the smaller the bag, the more of them you need, since each one yields proportionally less volume.
Bags round up, and a round column uses the diameter in feet
A slab uses length times width times thickness, and the thickness is in inches divided by 12 so a 4 inch pour is a third of a foot. A round column uses pi times the radius squared times the height, and the diameter in inches is halved and divided by 12 before that, which is why 12 inches is a half-foot radius. Quantity opens at 1 and will not go below 1, so two holes double the volume. The cubic yards are the total cubic feet divided by 27. Bag counts round up: an 80 pound bag is treated as 0.6 cubic feet, a 60 pound bag as 0.45, and a 40 pound bag as 0.3. A volume of zero is rejected.
Related tools
- Mulch, Soil, Gravel & Sand Calculator
Calculate how many cubic yards (or bags) of mulch, topsoil, gravel or sand you need for an area and depth — plus the weight in tons.
- Paint Calculator
Estimate how much paint you need for a room's walls (and ceiling) in gallons or litres, allowing for doors, windows and the number of coats.
- Flooring, Carpet & Countertop Calculator
Work out how much flooring, carpet or countertop material you need — square feet with waste, boxes of flooring, square yards of carpet and the total cost.
- Insulation R-Value Calculator
Find the recommended attic insulation R-value for your climate zone and how many inches of fiberglass, cellulose or spray foam it takes to get there.
- Life Insurance Needs Calculator
Estimate how much life insurance cover you need with the DIME method — debts, income replacement, mortgage and education — minus savings and existing cover.
- Notice Period Calculator (UK Statutory Notice)
Work out your notice period and last working day — UK statutory minimum notice (one week per year of service, up to 12 weeks) or your contractual notice in weeks, months or days.