Account

What new tool do you want?

Home & DIY

Tile & Grout Calculator

Calculate how many tiles you need for a floor or wall — including grout joints and waste — plus an estimate of grout bags.

How to use

  1. 1Enter the area to tile and the tile size (inches).
  2. 2Enter the grout joint width and tile thickness for a grout estimate.

How it's calculated

Tiles = area ÷ ((tile length + joint) × (tile width + joint)) × (1 + waste). Grout volume = joint width × depth × (L + W) per tile; estimated at about 0.115 lb of dry sanded grout per cubic inch of joint.

Frequently asked questions

How much extra tile should I buy?

10% for simple layouts, 15–20% for diagonal patterns or large tiles with many cuts. Keep a few spares for future repairs.

What grout joint width should I use?

1/16–1/8 in for rectified porcelain and wall tile; 1/8–3/16 in for most floor tile; 1/4 in or more for rustic tile.

Sanded or unsanded grout?

Unsanded for joints under 1/8 in; sanded for 1/8 in and wider.

The grout joint hides inside the tile count, too

It's tempting to think tile count only depends on tile size and area, but the joint width is baked into the per-tile footprint calculation: each tile effectively occupies (length + joint) × (width + joint), not just length × width. A wider grout line means each tile takes up more floor space including its share of the joint, so fewer tiles are needed to cover the same area — but more grout. Going from a 1/8 in joint to a 1/4 in joint on a 100 ft² floor measurably shifts the balance between tile count and grout volume, which is why both numbers move together when you change the joint field rather than one staying fixed.

The grout estimate is a dry-weight approximation

The grout formula works out the volume of material filling all the joints (length + width per tile × joint width × joint depth, scaled across the whole area) and converts that to pounds using roughly 0.115 lb of dry sanded grout per cubic inch — a figure that assumes sanded grout at typical density. Unsanded grout, epoxy grout and specialty grout products can pack differently, so treat the pound figure, and the suggested bag count, as a planning estimate rather than an exact order quantity. Buying one bag more than calculated is cheap insurance against running short mid-job with grout already curing in the lines you've done.

Worked example: Tile & Grout Calculator

Tiling 100 ft² with 12×12 in tiles, a 1/8 in grout joint and 3/8 in tile thickness, with 10% waste: each tile plus its joint share covers (12.125 × 12.125) ÷ 144 ≈ 1.02 ft², so the raw count is about 98 tiles, rounding up to 108 once waste is added. The grout works out to roughly 12.94 lb — call it one 25 lb bag with plenty to spare.

The joint is added to the tile before the count, then the count rounds up

Each tile is treated as its face plus the grout joint on both the length and the width, and that larger rectangle is what gets divided into the area. A zero tile size is rejected. The count then adds the waste allowance, which opens at 10 percent, and rounds up to a whole tile. Grout weight uses the joint, the tile thickness, and the area, and the hint under it says how many 25 pound bags that weight would fill, rounded up. Thickness opens at 0.375 inches and the joint at 0.125 inches. Changing the joint changes both the tile count and the grout, which is why a wider joint can mean fewer tiles and more grout at the same time.

Related tools

More: Home & DIY