Account

What new tool do you want?

Home & DIY

Brick, Block & Retaining Wall Calculator

Estimate bricks, concrete blocks or retaining wall blocks for a wall of any size — with openings, mortar joints and waste.

How to use

  1. 1Enter the wall length and height and any openings.
  2. 2Choose the unit type or enter a custom face size.

How it's calculated

Units = net wall area ÷ ((unit length + joint) × (unit height + joint)) × (1 + waste). US modular brick 7⅝ × 2¼ in with ⅜ in joints ≈ 6.75 per ft²; 8 × 16 in block ≈ 1.125 per ft².

Frequently asked questions

How many bricks per square foot?

About 6.75 US modular bricks per square foot of single-wythe wall with 3/8 in joints; about 60 per m² for UK/EU standard bricks.

Do retaining walls need a base?

Yes — typically 6 in of compacted gravel, with the first course partly buried. Walls over about 3–4 ft usually need engineering.

How much waste should I add?

About 5% for plain walls and 10% where there are many cuts or corners.

Why the mortar joint is folded into the per-unit footprint

Like tile grout lines, mortar joints take up real space between units, so each brick or block effectively occupies (unit length + joint) × (unit height + joint) of wall area, not just its own face dimensions. That's why a US modular brick, which measures 7⅝ × 2¼ in on its own, works out to roughly 6.86 units per square foot once its standard ⅜ in mortar joint is included — ignoring the joint and dividing raw brick face area into the wall area would noticeably undercount how many bricks you actually need.

Worked example: Brick, Block & Retaining Wall Calculator

An 80 ft² wall (20 ft long, 4 ft high) built in US modular brick needs 80 × 6.86 ≈ 549 bricks with no waste added. Build the identical wall in standard concrete block (15⅝ × 7⅝ in) instead, and the per-square-foot figure drops to 1.125 units, needing only 90 blocks — brick and block aren't interchangeable one-for-one even covering the same wall, because block units are simply much larger per piece.

Why retaining walls carry a structural concern this calculator doesn't check

Material count for a retaining wall is the same kind of area-divided-by-unit-footprint math as a garden wall, but retaining walls hold back soil under real lateral pressure, which is why the FAQ specifically flags that walls over roughly 3-4 ft typically need engineering, and a proper base — usually 6 in of compacted gravel with the first course partly buried — regardless of how the block count comes out. A retaining wall that's structurally undersized can fail even if every block was ordered correctly.

Why the waste percentage should track wall complexity

A straight run of wall with no corners wastes very little material since nearly every cut unit can be used somewhere, which is why 5% is the usual allowance — but a wall with multiple corners, a curve, or a stepped retaining wall following a slope creates more partial-unit cuts that can't always be reused, pushing waste closer to 10%. Underestimating this on a wall with several corners is a common reason for a last-minute extra trip to the supplier.

Openings come off the wall before the count, and waste rounds up

The unit menu sets the face size and a mortar joint that is already folded into how many units fit in a square foot. Custom lets me type a length and a height instead. Wall area is length times height minus the openings, and a result that is not positive is rejected. The count is that area times the units per square foot, plus the waste percent, which opens at 5, then rounded up to a whole unit. The per-square-foot line is shown before waste, so it will not match the count divided by the area once waste is on. A retaining-wall choice is still just a face size here. It does not check footing or drainage.

Related tools

More: Home & DIY