Account

What new tool do you want?

Home & DIY

Pool & Hot Tub Heating Cost Calculator

Estimate the energy and cost to heat a pool or hot tub by a number of degrees with a gas heater, electric heater or heat pump.

How to use

  1. 1Enter the water volume and the temperature rise you want.
  2. 2Choose the heater type and enter its efficiency and your energy prices.

How it's calculated

Energy (BTU) = gallons × 8.34 × temperature rise (°F). Gas: therms = BTU ÷ 100,000 ÷ efficiency. Electric: kWh = BTU ÷ 3,412 ÷ efficiency (COP for heat pumps, often 4–6).

Frequently asked questions

How much does a pool cover save?

Covers can cut heat loss by 50–70%, since most heat escapes through evaporation.

Why is a heat pump cheaper to run?

It moves heat from the air rather than generating it, delivering 4–6 units of heat per unit of electricity in warm weather.

Does this include ongoing heat loss?

No — it's the one-time cost of raising the temperature. Keeping it warm costs more depending on weather and covers.

This is the cost to raise the temperature, not to hold it

The whole calculation is a one-time energy balance: gallons × 8.34 (lb per gallon of water) × the degrees you want to raise, converted to BTU, then to therms or kWh depending on the heater. It tells you what it costs to go from, say, 70°F to 80°F once. It does not model ongoing heat loss to evaporation, wind and cooler night air, which is usually the bigger cost over a season — a pool loses heat continuously and needs re-heating as it cools, especially overnight. Treat this number as 'cost to warm it up,' and budget separately, or use a cover, to keep it there.

Why a heat pump's efficiency number looks so different

Gas and electric-resistance heaters are entered as a percentage efficiency under 100%, reflecting energy lost as exhaust heat or in the heating element. A heat pump is entered the same field but conceptually represents COP × 100 — a heat pump with a COP of 5 moves 5 units of heat for every 1 unit of electricity it consumes, because it's extracting ambient heat from the air rather than generating it from scratch. That's why heat pump 'efficiency' numbers in the hundreds (400-600) are normal here and don't mean something is broken — it's the same field reused for a fundamentally different physical process.

Why heat pump efficiency falls in cold weather

A pool heat pump's real-world COP drops as outdoor air temperature drops, since there's less ambient heat available to extract — a unit rated at COP 5.5 in 80°F air might perform closer to COP 3 in 50°F air. If you're heating a pool into cooler shoulder-season weather, lower the efficiency field accordingly rather than using the manufacturer's warm-weather spec, or the estimate will be too optimistic.

Worked example: Pool & Hot Tub Heating Cost Calculator

Raising a 15,000-gallon pool by 10°F needs 15,000 × 8.34 × 10 = 1,251,000 BTU. A gas heater running at 100% efficiency would burn 1,251,000 ÷ 100,000 = 12.51 therms, costing 12.51 × $1.50 ≈ $18.77 at $1.50 per therm. The same job on a heat pump with a COP of 5 (entered as 500% efficiency) needs only about 73 kWh of electricity instead — a fraction of the gas heater's energy input, though it would take far longer to deliver that heat since heat pumps output at a much lower BTU/hour rate than a gas heater.

Related tools

More: Home & DIY