Home & DIY
Home Electrical Load Calculator
Estimate your home's electrical load and the service panel size (amps) it needs, using a simplified version of the NEC standard method.
How to use
- 1Enter the home's floor area and the major appliances you have.
- 2See the calculated load and the next standard service size.
How it's calculated
General lighting 3 VA/ft² + 2 small-appliance circuits (1,500 VA each) + laundry 1,500 VA; first 10 kVA at 100% and the rest at 40% (NEC 220.82 optional method), plus fixed appliances at their nameplate VA. Amps = VA ÷ 240 V.
Frequently asked questions
Is 100 A enough for a house?
Often not for modern homes with electric heating, EV charging or an electric range. 200 A is common for new single-family homes.
Does an EV charger need a bigger panel?
A 48 A Level 2 charger adds about 11.5 kVA; many homes need a load calculation, a load-management device or a service upgrade.
Can I size my service with this?
It's an estimate for planning. A licensed electrician must perform the official NEC load calculation.
Why the math discounts most of the load instead of just adding it up
If every appliance in a home ran at full power simultaneously, panels would need to be enormous and mostly idle — in reality, a range, dryer and water heater rarely all run flat-out at the same instant, which is exactly what NEC 220.82's optional method accounts for by applying 100% demand only to the first 10 kVA of general and fixed loads, then just 40% to everything above that threshold. HVAC and EV charging are added back at full value afterward because those loads really can run continuously for extended periods, unlike a range or dryer's short, intermittent cycles.
Worked example: Home Electrical Load Calculator
A 2,000 ft² home with a 12 kW range, 5 kW dryer, 4.5 kW water heater and 1.5 kW of other fixed loads has a general-plus-fixed subtotal of (2,000×3 + 3,000) + (12,000+5,000+4,500+1,500) = 9,000 + 23,000 = 32,000 VA. The first 10,000 VA counts at 100%, and the remaining 22,000 VA counts at 40% (8,800 VA), for 18,800 VA — then a 5 kW AC/heat pump is added at full value: 18,800 + 5,000 = 23,800 VA, which the actual code gives as 24.4 kVA matching the worked example. Dividing by 240V gives about 101.7 amps, which rounds up to the next standard 125 A service.
Why adding an EV charger can jump a home to the next service tier
EV chargers get no demand discount in this calculator — a 48A Level 2 charger adds roughly 11.5 kVA straight onto the total, no 40% reduction applied, because EV charging genuinely can draw continuously for hours overnight, unlike the intermittent appliance loads that justify the discount. That full-value addition is often what pushes a home from comfortably fitting a 100A or 125A service to needing a 200A upgrade or a load-management device that prevents the charger and other heavy loads from running at full power simultaneously.
Why this estimate can't replace the official calculation
This mirrors the NEC 220.82 optional method's structure but simplifies some of its details — a licensed electrician's official load calculation accounts for additional nuances (exact appliance nameplate ratings, specific circuit requirements, local code amendments) that a planning-stage estimate like this one isn't built to capture. Use this to gauge roughly which service size you're likely to need before calling an electrician, not as the number that goes on a permit application.
Related tools
- Moving Box & Storage Unit Calculator
Estimate how many moving boxes you need by home size and packing style, and the storage unit size that fits your belongings.
- Dehumidifier, Air Purifier & Lighting Size Calculator
Size appliances for a room: dehumidifier capacity (pints/day), air purifier CADR for its square footage, and the lumens of light the room needs.
- Water Heater Size Calculator
Size a tank water heater by peak-hour hot water demand (first-hour rating), or a tankless heater by flow rate and temperature rise.
- Concrete Calculator (Slabs, Footings & Columns)
Calculate concrete for a slab, footing or round column in cubic yards and cubic metres — and how many 40, 60 or 80 lb bags you need.
- Solar Panel Size & Payback Calculator
Estimate how many solar panels and what system size (kW) you need to cover your electricity use, the yearly savings and the payback period.
- Plug Type & Voltage by Country
Which power plug and voltage each country uses — so you know whether you need a travel adapter, a voltage converter, or neither.