Account

What new tool do you want?

Home & DIY

Dehumidifier, Air Purifier & Lighting Size Calculator

Size appliances for a room: dehumidifier capacity (pints/day), air purifier CADR for its square footage, and the lumens of light the room needs.

How to use

  1. 1Enter the room's area and ceiling height.
  2. 2Choose how damp the room is and what the room is used for.

How it's calculated

Dehumidifier (AHAM chart, 2019 test standard): roughly 22–50 pints/day depending on area and dampness. Air purifier: CADR (cfm) ≥ ⅔ of floor area for 8 ft ceilings (AHAM 2/3 rule). Lighting: lumens = area × recommended foot-candles.

Frequently asked questions

What's CADR?

Clean Air Delivery Rate — how many cubic feet per minute of filtered air a purifier delivers, measured by AHAM for smoke, dust and pollen.

Why did dehumidifier ratings change?

The US Department of Energy's 2019 test procedure uses cooler conditions, so a 70-pint unit from before 2019 is about a 50-pint unit today.

How many lumens does a kitchen need?

About 50–75 foot-candles for work areas — a 150 ft² kitchen needs roughly 7,500–11,000 lumens across ambient and task lighting.

Why three unrelated appliances share one calculator

Dehumidifiers, air purifiers and lighting all scale with the same two inputs — floor area and, for purifiers, ceiling height — which is why it makes sense to size all three from one room entry rather than three separate tools. But the scaling logic differs for each: dehumidifier capacity jumps in discrete steps from an AHAM chart based on area and dampness, purifier CADR scales linearly with both area and ceiling height (a taller room has more air volume to turn over), and lighting scales linearly with area times how bright the room's use demands.

Worked example: Dehumidifier, Air Purifier & Lighting Size Calculator

A 300 ft² room with 8 ft ceilings, described as 'very damp' with visible damp spots, falls in the lowest area bracket (≤500 ft²) of the damp table, giving a 22 pints/day dehumidifier — the same size as a merely 'moderately damp' room at this size, since both conditions map to 22 in the smallest bracket before damp severity has somewhere to add more pints. The air purifier CADR comes to (300 × ⅔) × (8/8) = 200 cfm. For dining-room lighting at 30 lumens per square foot, the room needs 300 × 30 = 9,000 lumens total across all fixtures.

Why the dehumidifier rating on an old unit can be misleading

The FAQ flags something easy to miss while shopping secondhand or comparing specs: the US Department of Energy changed dehumidifier test conditions in 2019 to use cooler, more realistic air, which means a pre-2019 '70-pint' unit performs more like a current 50-pint unit under the new standard. Comparing a used unit's old rating directly against this calculator's output (which uses current AHAM figures) without accounting for that shift will make the old unit look more capable than it actually is.

What these sizing estimates don't account for

All three estimates assume a reasonably average room — they don't adjust for unusually high humidity sources (an attached bathroom or laundry venting into the space), windows that add significant heat gain affecting purifier runtime, or task-specific lighting needs like reading nooks that want more concentrated light than the whole-room average implies. These are starting points for the right capacity class, not a substitute for the manufacturer's own room-size rating on the specific unit you're considering.

Related tools

More: Home & DIY